About 60% of the energy input in chemical industry is discarded from plant. Energy saving can be achieved entire plant by recovering these waste heats and reusing them as power heat sources An adsorption pump has been developed for purpose regeneration such unused energy. In this study, saturated humid air was supplied to a device packed with 13X zeolite particles 4 mm diameter. The time variat...

Heat treatment may result in variation of wood equilibrium moisture content (EMC). During this study, tauari (Couratari oblongifolia), ash (Fraxinus excelsior), and oak (Quercus rubra) woods were heat-treated at 190, 200, and 210oC for 3 hours and then put into a conditioning chamber with a temperature from 30 to 75oC and a relative humidity from 50 to 90%. The isothermal moisture adsorption cu...

1. Introduction Zeolites are microporous materials which are ideally suited for different industrial applications, e.g. as separators or catalysts. Their applicability is determined by the dynamical and the adsorptive properties of the molecules inside their micropores. Adsorption kinetics in zeolite has been explained as a two-step process, adsorption on the external crystal surface and subseq...

In this work, styrene removal from wastewater by using sugarcane waste (bagasse) as an adsorbent was studied. Equilibrium isotherms and kinetics were determined; the effects of bagasse particle size and concentration, solutions pH, and temperature on the biosorption of styrene were studied in batch experiments. Adsorption equilibrium data was successfully fitted to Langmuir isotherms (R2=0.986)...

Amine-containing adsorbents have been extensively investigated for post-combustion carbon dioxide capture due to their ability to chemisorb low-concentration carbon dioxide from a wet flue gas. However, earlier studies have focused primarily on the carbon dioxide uptake of adsorbents, and have not demonstrated effective adsorbent regeneration and long-term stability under such conditions. Here,...

The potential to remove Cr(VI) from aqueous solutions through biosorption using dried Sargassum thunbergii Kuntze was investigated with respect to initial pH, amount of biosorbent, initial Cr(VI) concentrations and temperature. Cr(VI) removal efficiency was influenced significantly by the variation of pH, and the optimum pH was about 2.0. Moreover, the biosorption kinetics followed the pseudo-s...

the potential of heat inactivated saccharomyces cerevisiae in the bioremoval and reduction ofcr (vi) ions from wastewaters was evaluated in terms of metal uptake in time and at equilibrium, andbiosorption efficiency, by varying ph, biosorbent doses, contact time and temperature, in batch mode. during the sorption process, the heat inactivated biomass of the yeast saccharomyces cerevisiae is cap...

A new microporous framework, Zn(NDC)(DPMBI) (where NDC = 2,7-naphthalene dicarboxylate and DPMBI = N,N'-di-(4-pyridylmethyl)-1,2,4,5-benzenetetracarboxydiimide), containing the redox-active benzenetetracarboxydiimide (also known as pyromellitic diimide) ligand core has been crystallographically characterised and exhibits a BET surface area of 608.2 ± 0.7 m(2) g(-1). The crystallinity of the mat...