Machined surface quality determines the reliability, wear resistance and service life of carbon fiber reinforced plastic (CFRP) workpieces. In this work, the formation mechanism of the surface topography and the machining defects of CFRPs are proposed, and the influence of milling parameters and fiber cutting angles on the surface quality of CFRPs is obtained, which can provide a reference for ...

It is observed that large quantities of hydrogen (H2) are released at ambient temperatures during the mechano-chemical synthesis of the Li-Al-N-Mg-based hydride composites using an energetic ball milling in a unique magneto-mill. For the (nLiAlH4+LiNH2; n=1, 3, 11.5, 30) composite, at the molar ratio n=1, the LiNH2 constituent destabilizes LiAlH4 and enhances its decomposition to Li3AlH6, Al an...

An experimental study is reported on natural convection heat transfer from a helical heating coil to the surrounding fluid. The coil is heated electrically and the surrounding fluid is selected to be water. The range of parameters are: Rayleigh number, 879 ?£ Ra ?£ 780168, Prandtl number, 4.22 ?£ Pr ?£ 10.02, dimensionless coil diameter,7.69 ?£ Dave /d ?£ 10.77, number of coil rings, 2 ?£ N ?£ ...

Selective laser melting (SLM) offers significant potential for the manufacture of the advanced complex-shaped aluminium matrix composites (AMCs) used in the aerospace and automotive domains. Previous studies have indicated that advanced composite powders suitable for SLM include spherical powders with homogeneous reinforcement distribution, a particle size of less than 100 μm and good flowabili...

mechanical alloying of binary and ternary elemental powder mixtures with the nominal compositions of mg2ni and mg(2-x)mnxni (x= 0, 0.05, 0.10 and 0.15 at. %) were carried out in a planetary ball mill for various milling times of 5, 10, 15, 20, 30 and 60 h. x-ray diffraction and field emission scanning and transmission electron microscopy were used for the characterization of the milled products...

although cu and fe are immiscible under equilibrium conditions, they can form supersaturated solid solutions by mechanical alloying. in this paper, nano-structured of the metastable cu-fe phase containing 10, 15, 20 and 25% wt fe were synthesized by intensive ball milling for 15h, in order to achieve a solid solution of fe in cu. the phase composition, dissolution of the fe atoms into the cu ma...

Inconel 718 is a typical hard-to-machine material that requires thermally enhanced machining technology such as laser-assisted milling. Based upon finite element analysis, this study simulates the forces in the laser-assisted milling process of Inconel 718 considering the effects of grain growth due to c0 and c00 phases. The c0 0 phase is unstable and becomes the d phase, which is likely to pre...

Most red lentil produced worldwide is consumed in dehulled form, and post-harvest milling and splitting qualities are major concerns in the secondary processing industry. Lentil producers in northern temperate regions usually apply pre-harvest desiccants as harvest aids to accelerate the lentil crop drying process and facilitate harvesting operations. This paper reports on field studies conduct...

This paper contains data and supporting information of and complementary to the research article entitled "Effect of jar shape on high-energy planetary ball milling efficiency: simulations and experiments" (Broseghini et al.,) [1]. Calcium fluoride (CaF2) was ground using two jars of different shape (cylindrical and half-moon) installed on a planetary ball-mill, exploring different operating co...

An autonomous machine tool has been developed to solve fundamental issues with the current command method using NC programs, and some key technologies for its realization have been devised. In the process planning system, various process plans are prepared, and the appropriate process plan can be selected to achieve flexible machining operations. Digital Copy Milling, digitizing the principle o...