A nanostructural hydroxyapatite (HA) coating was deposited to the porous Ti6Al4V acetabular cup implants using a room temperature electrophoretic deposition (EPD) process in order to achieve the improved bonding strength between the implants and cells, fast healing, good corrosion resistance and long-term stability after implantation. The micropores created in the coating will improve the bioac...

ITO thin films were deposited by spin coating method starting from indium and tin propoxide in the frame of a sol-gel process. Films with the thickness corresponding to 68 nm for one layer deposition were produced and characterized by X-ray diffraction, transmission electron microscopy and infrared reflection spectroscopy. Low conductivity polycrystalline films exhibiting cubical structure (bix...

FUJIFILM Corporation has developed a novel near-infrared reflective film using disk-shaped silver nanoparticles. We estimated the best shape and arrangement of the silver nanodisks to reflect near-infrared rays by simulation. In order to form an optimum structure, we applied the technology which has been used to form silver halide tabular grains in photographic film. Moreover, we have developed...

Fundamental reaction processes between vapor-phase chemical precursors and high molecular weight polymers are important for polymer coating, encapsulation and surface modification. Using trimethylaluminium and water in an atomic layer deposition (ALD) exposure sequence, reactions between vapor-phase trimethylaluminium and common polymers with different substituents are quantified using in situ ...

Cuticular nanostructures found in insects effectively manage light for light polarization, structural color, or optical index matching within an ultrathin natural scale. These nanostructures are mainly dedicated to manage incoming light and recently inspired many imaging and display applications. A bioluminescent organ, such as a firefly lantern, helps to out-couple light from the body in a hig...

High infrared absorption, large temperature coefficient of resistance (TCR) and small 1/f noise are preferred characteristics for sensing materials used in bolometers. In this paper, we discuss a cytochrome c protein as a potential sensing material for long-wavelength bolometers. We simulated and experimentally proved high infrared absorption of cytochrome c in the wavelength between 8 μm and 1...

A procedure has been developed to prepare ultra-thin zeolite films supported on Si(1 0 0). Films were prepared by spin-coating a solution of Silicalite-1 zeolite precursors diluted in ethanol, followed by hydration in water vapour and heating to 60 C. High resolution transmission electron microscopy analysis of sample cross-sections shows that the surfaces are both smooth and continuous, and fi...

A novel cobalt-free Cu1.2Mn1.8O4 spinel coating is prepared and evaluated for the metal interconnect of solid oxide fuel cell. Mn-35Cu and Co-35Mn alloy coatings are deposited on 430 SS substrate and then in-situ oxidized in air at 750 ◦C for 100 h. XRD results confirm that Cu1.2Mn1.8O4 spinel with some Mn2O3 is formed, and the average thickness of the coating is 70–80 μm according to cross sec...

In this investigation, Ti/TiN nanolayer and TiN single layer coatings were coated on substrate of AISI 316L stainless steel by applying physical vapor deposition (PVD) using the type of cathodic arc evaporation (CAE). The evaluation of microstructure were carried out using x-ray diffraction (XRD), nanoindentation, atomic force microscopy (AFM) as well as scanning electron microscopy (SEM). Pola...