A study has been made of the deformation field in plane-strain indentation of metals with a flat punch. Deformation field parameters such as velocity and strain rate have been measured using the technique of particle image velocimetry. For this purpose, images of the indentation region were recorded in situ during the deformation process, and motion of ‘asperities’ specially introduced onto a s...

Nano-indentation with spherical indenters is a test technique largely used to determine the elastic–plastic behavior of very small volume material. In this work, indentation size effects under were investigated for Fe9Cr model alloys and reduced activation tempered martensitic steel Eurofer97. Experimental tests finite element method (FEM) simulations performed. Results analysis experimental re...

Twenty-four slowly adapting type 1 (SA1) and 26 rapidly adapting (RA) cutaneous mechanoreceptive afferents in the rhesus monkey were studied with an array of independently controlled, punctate probes that covered an entire fingerpad. Each afferent had a receptive field (RF) on a single fingerpad and was studied at 73 skin sites (50 mm2). The entire array was lowered to 1.6 mm below the point of...

Indentation-induced plastic deformation of amorphous silicon (a-Si) thin films was studied by in situ Raman imaging of the deformed contact region of an indented sample, employing a Raman spectroscopy-enhanced instrumented indentation technique. Quantitative analyses of the generated in situ Raman maps provide unique, new insight into the phase behavior of as-implanted a-Si. In particular, the ...

The glabrous skin of the monkey's hand was stimulated with a waveform that indented the skin at a rate of 0.4 mm/sec, held the skin steadily or nearly steadily indented for 12 sec or longer, and then retracted back to the starting position. Recordings were made of activity in single afferent fibers in response to these stimuli. The average discharge frequency of 21 slowly adapting mechanorecept...

Natural and synthetic hydrogel scaffolds exhibit distinct viscoelastic properties at various length scales and deformation rates. Laser Speckle Rheology (LSR) offers a novel, non-contact optical approach for evaluating the frequency-dependent viscoelastic properties of hydrogels. In LSR, a coherent laser beam illuminates the specimen and a high-speed camera acquires the time-varying speckle ima...

Ceramic/metal interfaces were studied that fail by atomistic separation accompanied by plastic dissipation in the metal. The macroscopic toughness of the specific Ni alloy/Al2O3 interface considered is typically on the order of ten times the atomistic work of separation in mode I and even higher if combinations of mode I and mode II act on the interface. Inputs to the computational model of int...

OBJECTIVE This study evaluated the influence of porcelain (VM9, VITA Zahnfabrik, Germany) thickness on the flexural strength and crack propagation in bilayered zirconia systems (YZ, VITA Zahnfabrik, Germany). MATERIAL AND METHODS Thirty zirconia bars (20.0x4.0x1.0 mm) and six zirconia blocks (12.0x7.5x1.2 mm) were prepared and veneered with porcelain with different thickness: 1 mm, 2 mm, or 3...

− In the instrumented indentation test including nanoindentation, the mechanical parameters are calculated by test force and indenter contact/surface area. The area is determined as a function of depth, which is measured as the displacement from surface of sample. Therefore how to determine the surface is important, however, it is not easy to determine sample surface exactly during the test. Be...

Mechanical properties of ZnS nanobelts were measured at room temperature by direct nanoindentation experiments. It was found that the ZnS nanobelts achieve 79% increase in hardness but 52% decrease in elastic modulus compared to bulk ZnS. The nanobelts were found to exhibit creep under indentation. Indentation cracking was preferred along the belt growth direction. Indentation deformation behav...