Modeling and simulation of unconventional reservoirs are much more complicated than the conventional reservoir modeling, because of their complex flow characteristics. Mechanisms, which control the flow in the reservoir, are still under the investigation of researchers. However, it is important to investigate applications of mechanisms which are present to our knowledge. This paper presents the...

almcm-41 was applied for adsorption of methylene blue (mb) and auramine (au) in single and binary component systems. in the single component systems, almcm-41 represents higher adsorption capacity for mb than au with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚c for mb and au, respectively. in the binary component system, mb and au exhibit competitive adsorption onto...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

 Aims of the Study: This study was aimed to investigate the adsorption mechanism of the arsenic removal from water by using carbon nanotubes in continuous adsorption column. Materials & Methods: Independent variables including carbon nanotubes dosage, contact time and breakthrough point were carried out to determine the influence of these parameters on the adsorption capacity of the...

In this work, the efficiency of activated carbon derived from carbonized date pits (ADP) and rice husks (ARH) was compared with commercial activated carbon (CAC) for the reduction of COD in wastewater arising from resin manufacturing plant. The process was studied in batch mode with employing different absorbents optimizing various parameters, such as adsorbent dosage, contact time and pH. Adso...

The plant powder of Jaswand (Hibiscus rosa-Sinensis) were activated with sulphuric acid and used as low cost easily available and renewable biological adsorbent for the removal of acid dyes (acid blue, acid red and malachite green) from aqueous solution. Batch experiments were carried out for adsorption kinetics and isotherms. Operating variable studied were pH, temperature, adsorbent dose, ini...

The aim of this study is to determine the adsorption performance of three types of adsorbents for removal of As(V) from water: Bayoxide® E33 (granular iron(III) oxide), Titansorb® (granular titanium oxide) and a suspension of precipitated iron(III) hydroxide. Results of As(V) adsorption stoichiometry of two commercial adsorbents and precipitated iron(III) hydroxide in tap and demineralized wate...

The development of a country depends on industrialization and agricultural production. Due to this number of industries and factories like metal industries, dyeing, fertilizers, painting industries are coming continuously which creates severe environmental pollution especially water problem should be created and also cause global warming. To controlling of environmental pollution is very big ch...

Composite chitosan-magnetite microparticles (Fe-Cc) were evaluated as a new adsorbent for cobalt and nickel ion separation from aqueous solutions. Sorption batch experiments were conducted for optimizing the pH, initial target ion concentration and adsorbent amount. The experimental data were fitted using Langmuir, Freundlich, and respectively DubininRadushkevich isotherm models. The Langmuir m...

Rhodamine B (Rh-B) is one of the most common pollutants in the effluents of textile industries effluents in developing countries. This study was carried out to evaluate the applicability of used black tea leaves (UBTL) for the adsorptive removal of Rh-B from aqueous system by investigating the adsorption kinetics in batch process. The effects of concentration and temperature on adsorption kinet...