نتایج جستجو برای: laser beam
تعداد نتایج: 283190 فیلتر نتایج به سال:
An experimental investigation with Nd:YAG laser system was carried out to study the effects of laser hardening process parameters on the microstructure and hardness during laser hardening of EN25 steel. The laser beam is allowed to scan on the surface of the work piece by varying the laser beam power (750–1250 W) and travel speed (500–1000 mm/min) of the work table. The microstructural features...
The results of theoretical and numerical considerations of linear Compton scattering are used to evaluate characteristics of X-rays produced by collision between a low emittance electron beam and intensive laser light in an X-ray generator NESTOR of NSC KIPT. Two main generation modes have been under consideration at preliminary NESTOR design. There are the operation mode for medicine 33.4 keV ...
High-resolution wavefront control for adaptive optics requires accurate sensing of a measure of optical quality. We present two analog very-large-scale-integration (VLSI) image-plane sensors that supply real-time metrics of image and beam quality, for applications in imaging and line-of-sight laser communication. The image metric VLSI sensor quantifies sharpness of the received image in terms o...
In the last years, laser beam drilling became increasingly important for many technical applications as it allows the contactless production of high quality drill holes. So far, mainly short laser pulses are of industrial relevance, as they offer a good compromise between precision and efficiency and combine high ablation efficiency with low thermal damage of the workpiece. Laser beam drilling ...
An electron beam microbunched on the optical wavelength scale of ø2.5 mm by an inverse free electron laser accelerator was observed. The optimum bunching was achieved for a 1% energy modulation of a 32 MeV electron beam with 0.5 GW CO2 laser power. The microbunching process was investigated by measuring the coherent transition radiation produced by the energy modulated electron beam. A quadrati...
The non-continuous laser beam in pulsed lasers allows the mechanical peening between two consecutive beams on a still hot weld bead. At a very short time (20, 150 and 300 ms) after laser pulse application, mechanical peening was performed on the welding bead. To achieve these short times, the light sensor detects the nth laser pulse and the mechanical arm starts moving. Upon reaching the tip of...
Studying Gaussian beam is a method to investigate laser beam propagation and ABCD matrix is a fast and simple method to simulate Gaussian beam propagation in different mediums. Of the ABCD matrices studied so far, reflection and refraction matrices at various surfaces have attracted a lot of researches. However in previous work the incident beam and the principle axis of surface are in parallel...
The efficient improvement of laser beam quality is demonstrated by coherent combining of two Nd:YVO4 lasers in an improved Michelson cavity. When the two lasers are separately operated with beam qualities of M(x)2 = 1.74 and M(y)2 = 1.34 for laser 1 and M(x)2 = 1.53 and M(y)2 = 1.39 for laser 2, by coherent combining of the two lasers, a single beam output exceeding 2 W with a nearly perfect TE...
An automated liquid column height measurement technique using the total internal reflection of a collimated laser beam from the convex meniscus surface is proposed. This new technique can alleviate the shortcomings of the traditional cathetometer that tends to introduce user bias. Experimental measurements and theoretical predictions have been conducted to examine the detected signal broadening...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید