A model of heat transfer through greenhouse covering materials was developed in this study. The influences of the thermal properties of covering materials, the construct parameters of greenhouse and the environment inner and outer of greenhouse were completely considered in the model. Heat transfer flux density through covering layer can be simulated and forecasted by using this model. The simu...

simulation of rough rice drying is one of the proper methods for predicting moisture distribution in the product, and throughout the process of drying. the drying process must be well understood and controlled so that design guidelines which reduce or minimize drying damage to rough rice can be established and improved. therefore, an accurate understanding and description of the drying mechanis...

Boiling heat transfer rates impact the performance of various processes like quenching, steam generation, desalination, and boiling water reactors. The film boiling regime of the boiling curve has very low heat transfer rates around the Leidenfrost point which corresponds to the formation of a stable and continuous vapor layer at the solid-liquid interface (Leidenfrost effect). This insulating ...

A 2D unsteady computational fluid dynamics (CFD) model is employed to simulate buoyancy-driven turbulent ventilation in attics with different pitch values and ceiling insulation levels under summer conditions. The impacts of roof pitch and ceiling insulation on the cooling load of gable-roof residential buildings are investigated based on the simulation of turbulent air flow and natural convect...

recently, with increasing of interest of all people especially young people and teenagers to sports in iran in parallel the tendency of investors both in governmental and private parts is increased ,and in this part the special places and spaces of sport was not departed , and billion rials (iran’s currencies) is paid for making some places for sport or equipped the old building .in this part f...

A fire growth and smoke movement model for a multi-compartment building has been developed at the National Research Council of Canada. This development is primarily intended to help evaluate the risk from fires in buildings. This paper presents the related physical models, numerical methods, and some verification examples. The 2-zone ordinary differential equations (ODEs) are derived for the co...

bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. high mixing that result in high heat and mass transfer rates are amongst their advantages. heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

the performance of a γ-al 2 o 3 /n-decane nanofluid shell-and-tube heat exchanger in a biomass heating plant is analyzed to specify the optimum condition based on the maximum heat transfer rate and performance index for wide range of nanoparticle volume fraction (0–7%). compared with pure          n-decane, the obtained results in this research show that by using γ-al 2 o 3 /n-decane nanofluid ...