A nearby supernova (SN) explosion in the past can be confirmed by the detection of radioisotopes on Earth that were produced and ejected by the SN. We have now measured a well resolved time profile of the 60Fe concentration in a deep-sea ferromanganese crust and found a highly significant increase 2.8 Myr ago. The amount of 60Fe is compatible with the deposition of ejecta from a SN at a distanc...

Dynamic recrystallization (DRX) is almost universally observed in the microstructure of adiabatic shear bands. It is usually admitted that DRX results from the large temperatures that develop in the band along with very high local strains. This paper reports the observation of dynamically recrystallized nanograins in Ti6Al4V alloy specimens that were impact loaded to only half the failure strai...

Grain boundary segregation provides a method for stabilization of nanocrystalline metals – the selection of an alloying element that will segregate to the boundaries can lower the grain boundary energy, attenuating the driving force for grain growth. The segregation strength, relative to mixing enthalpy, of a binary system determines the propensity for segregation stabilization. This relationsh...

GaInAsSb is a promising material for mid-infrared devices such as lasers and detectors because it is a direct band gap material with large radiative coefficient and a cut-off wavelength that can be varied across the mid-infrared (from 1.7 to 4.9 μm) while remaining lattice matched to GaSb. On the other hand, the potential of the alloy is hampered by predicted ranges of concentration where the c...

Background: A microscopic study on ancient metals was established to identify chemical composition and microstructure of archaeological tin bronze objects. For this purpose, ten small bronze pieces from Baba Jilan Iron Age site, western Iran, were selected and studied by optical microscopy (OM) and scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDS) methods. Results: The...

Nickel-metal hydride batteries (Ni-MH) are storers of electrochemical energy, which have a higher specific storage capacity than lead or nickel-cadmium batteries. The demand for Nickel-metal hydride batteries is increasing rapidly since their market launch in the early 1990's. Today there is no suitable and sustainable recycling process to recover nickel, cobalt and rare-earth metals. The disca...

Fatigue resistance of nanocrystalline commercial pure titanium obtained by hydrostatic extrusion was investigated. Coarse grained titanium and Ti6Al4V alloy were used as the reference materials. The fatigue limit and fatigue life examined at constant stress amplitude, were found to increase significantly compared to those of the coarse-grained counterparts. It is suggested that the observed imp...

Magnesium alloys are promising candidates for biodegradable medical implants which reduce the necessity of second surgery to remove the implants. Yttrium in solid solution is an attractive alloying element because it improves mechanical properties and exhibits suitable corrosion properties. Silver was shown to have an antibacterial effect and can also enhance the mechanical properties of magnes...