Ti-Al-Si alloys are prospective material for high-temperature applications. Due to low density, good mechanical properties, and oxidation resistance, these intermetallic alloys can be used in the aerospace and automobile industries. Ti-Al-Si alloys were prepared by powder metallurgy using reactive sintering, milling, and spark plasma sintering. One of the novel SPS techniques is high-pressure s...

This paper describes an instrument capable of detecting flaws in “green-state” (prior to sintering) powder metallurgy (P/M) parts. The instrument uses a matrix of impedance measurements from a multiprobe array that contacts the surface of the P/M part. The array of measured data is processed to not only detect the presence of flaws but determine their location, size, and orientation as well. Ex...

Data regarding bulk polycrystalline nickel samples obtained by powder metallurgy using Spark Plasma Sintering (SPS) are presented, with a special emphasis on the influence of a cold isostatic pre-compaction on the resulting morphologies and subsequent mechanical properties. Three types of initial powders are used, nanometric powders, micrometric powders and a mixture of the formers. For each ty...

Tijana Đorđević1*, Slavica Šiler-Marinković2, Rada Đurović-Pejčev1, Suzana Dimitrijević-Branković2 and Jelena Gajić Umiljendić1 1Institute of Pesticides and Environmental Protection, 11080 Belgrade, Serbia ([email protected]) 2University of Belgrade, Faculty of Technology and Metallurgy, Division of Biochemical Engineering and Biotechnology, Karnegijeva 4, 11000 Belgrade, Serbia Rec...

When a metallic powder is subjected to a suffkiently high pressure a certain amount of adhesion takes place between individual particles. If this compact i s then sintered the bond is improved by diflusion and intergranular grain growth. The earliest known platinum objects were fabricated by such a powder metallurgical process, and when European scientists first addressed the problem of manufac...

The purposes of this investigation were to determine the effect of nitrogen on the strain aging and brittle ductile transition of iodide vanadium and to determine the basic mechanisms responsible for the occurrence of these results. Disciplines Ceramic Materials | Metallurgy | Other Materials Science and Engineering This report is available at Iowa State University Digital Repository: http://li...

Light weight materials coupled to the need for cost-effective processing have combined to create a significant opportunity for aluminium powder metallurgy as its increasing interest. Aluminium alloy (AA 2219) metal matrix composite reinforced with multi walled carbon nanotube (MWCNT) produced by powder metallurgy (P/M) technique was analysed and CNTs dispersion were traced. The micro hardness a...

Solution Precursor Plasma Spray (SPPS) technique is an emergent technique which offers significant performance advantages with various functional coatings like YSZ, ZnFe2O4, LSM, metal-doped ZnO, etc. Apart from the above capabilities, efforts towards development of an innovative hybrid approach through simultaneous deposition of powder and solution resulted in coatings with unique microstructu...

Just like soldering, wire bonding appears to be a simple process and is frequently taken for granted. People tend to think all that is required to have a high quality bonding process is a simple wire pull test to monitor and control the process. But like soldering, this process is complex and requires a thorough understanding of the metallurgy, thermodynamics, and surface chemistry involved. Th...

Metal matrix composites (MMCs) have become attractive for engineering structural applications due to their excellent specific strength property and are increasingly seen as alternative to the conventional materials particularly in the automotive, aerospace and defence industries. Al/SiC MMC has aluminium matrix and the silicon carbide particles as reinforcements and exhibits many desirable mech...