This paper deals with formulation of constitutive relations describing the time-dependent deformation in sedimentary rocks. In contrast to classical viscoplasticity, the creep effects are attributed here to a progressive evolution of material microstructure. First, an internal variable monitoring the degradation process is introduced followed by presentation of a general framework of chemo-plas...

We investigated the effects of the additions of Zr and other alloying elements on the mechanical properties and microstructure in Cr-Mo plastic mold steels. The addition of alloying elements changed the microstructure of the normalized samples from the upper bainite to lower bainite due to the increased hardenability. The tempering temperature influenced the strength and hardness values, especi...

The paper by Karma and Tourret (this volume) in this special issue focuses on multiscale modeling approaches ranging from atoms to microstructure. In the present one, the most recent and significant modeling contributions dealing with the scale of solidification from microstructure to grain structure are briefly reviewed. The paper also covers modeling of defect formation during the last stage ...

The effects of increasing the nickel content from 3 to 7 or 9 wt-% were investigated in high strength steel weld metals with 2 wt-% manganese. Nickel additions were beneficial to strength but detrimental to impact toughness. Significant segregation of nickel and manganese to interdendritic regions was observed at the two higher nickel contents. In these weld metals a mainly martensitic microstr...

Mullite and mullite/ZrO2-7wt.%Y2O3 coatings could be thought among the main protective layers for environment barrier coatings (EBCs) to protect Si-based substrates in future gas turbine engines. Considering that feedstock of the compound powder is not commercially available, two powder processing routes Spray Drying (SD) and Flame Spheroidization (FS) were implemented for both types of powders...

In Al2O3 suspensions, depending on the experimental conditions, very different microstructures can be found, comprising fluidlike suspensions, a repulsive structure, and a clustered microstructure. For technical processing in ceramics, the knowledge of the microstructure is of importance, since it essentially determines the stability of a workpiece to be produced. To enlighten this topic, we in...

Cortical bone, found in the central part of long bones like femur, is known to adapt to local mechanical stresses. This adaptation has been linked exclusively with Haversian remodelling involving bone resorption and formation of secondary osteons. Compared to primary/plexiform bone, the Haversian bone has lower stiffness, fatigue strength and fracture toughness, raising the question why nature ...

in this research, graphitization transformation of a commercial hypereutectoid steel called ck100 was studied by the dilatometric experiments at the range of 600 – 700 °c from prior martensitic structure. also the effect of quenching media on the initial graphitization time and completion of transformation has been discussed. also, graphitization transition from the different prior microstructu...

Ternary Au-Ag-Cu alloys differing in composition were produced by means of a sequential gradual sputtering of elemental thin films. The resultant multilayers were then subjected to various heat treatments to promote a phase formation by interdiffusion. A long-period superlattice AuCu3 I1 was found among the different phases. The microstructure of this phase revealed growth stacking faults and t...

We have determined the response time of dilute electrorheological fluids (ER) in drag flow from the dynamic dielectric response. On the basis of a kinetic rate equation a new formula was derived to approximate the experimental time-dependent dielectric permittivity during the temporal evolution of the microstructure. The dielectric response time was compared to the standard rheological response...