We report on the effect of repetition rate on the formation and surface texture of the laser induced homogenous microstructures. Different microstructures were micromachined on copper (Cu) and titanium (Ti) using femtosecond pulses at 1 and 10 kHz. We studied the effect of the repetition rate on structure formation by comparing the threshold accumulated pulse ( F Σ p u l s e ) values and the ef...

This paper provides an overview of fabrication and design of CMOS-based microelectromechanical systems with emphasis on inertial sensor and data storage applications. High-aspect-ratio (4.4:1) microstructures can be fabricated using conventional CMOS processing followed by a sequence of maskless dry-etching steps. The CMOS dielectric and metallization layers, normally used for electrical interc...

This work deals with the feasibility of obtaining Austempered Ductile Iron with Dual Phase structures (DPADI) through heat treatment, starting from different as-cast microstructures. The mechanical properties on these microstructures were evaluated. DPADI microstructures were obtained by adding different tenors of silicon (2.4% to 4.2%) to the melts and keeping the other alloying elements const...

Recently, the rapid development of technology such as biochips, microfluidic, micro-optical devices and micro-electromechanical-systems (MEMS) demands the capability to create complex design of three-dimensional (3D) microstructures. In order to create 3D microstructures, the traditional photolithography process often requires multiple photomasks to form 3D pattern from several stacked photores...

This paper reviews some current applications of porphyroblast microstructures, some difficulties with interpreting them, and some possible directions for future studies. Porphyroblast microstructures have attracted the attention and imagination of geologists for more than a century, and have enjoyed a resurgence in popularity over the last two decades. Although commonly complex, they are of bro...

In this paper we demonstrate, using a fabrication technique, liquid-phase photopolymerization (LP3) for the relatively fast and low-cost integration of thick polymers and electroformed metal microstructures to develop a range of microfluidic components and systems. Liquid-phase UV-photosensitive polymers, similar to negative-tone photoresists, are used to create both polymer microstructures and...

Deformable polydimethylsiloxane (PDMS) microfluidic devices embedded with three differently-shaped obstacles (hexagon, square, and triangle) were used to examine the significant challenge to classical fluid dynamics. The significant factors in determining a quasi-steady state value of flow velocity (v)QS and pressure drop per unit length (∆P/∆x)QS were dependent on the characteristic of embedde...

The elastic energy of a multiphase solid is a function of its microstructure. Determining the infimum of the energy of such a solid and characterizing the associated optimal microstructures is an important problem that arises in the modeling of the shape memory effect, microstructure evolution, and optimal design. Mathematically, the problem is to determine the relaxation under fixed phase frac...

The study of nucleation mechanism of new grains during severe plastic deformation of magnesium alloys is of great importance to control the characteristics of final microstructures.  To investigate the role of discontinuous recrystallization, a wrought AZ31 magnesium alloy was deformed by accumulative back extrusion process at 330 °C.  The obtained microstructures were studied using optical and...

Adapting ways to functionalize polymer materials is becoming increasingly important to their implementation in translational biomedical sciences. By tuning the mechanical, chemical, and biological qualities of these materials, their applications can be broadened, opening the door for more advanced integration into modern medical techniques. Here, we report on a method to integrate chemical func...