the present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. soot concentrations inside the combustor are measured by filter paper technique. the simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and soo...

investigations are carried out to evaluate the performance of a low heat rejection (lhr) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown and air gap insulated liner with superni insert with different operating conditions of crude jatropha oil with varied injection timing and injection pressure.  performance parameters of brake ther...

investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (lhr) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].the engine had different operating conditions...

To develop the combustion characteristics of aluminum powder in steam, the ignition and combustion process of aluminum powder with different additives (KBH4, ammonium perchlorate (AP) and NaCl) addition at different levels were studied using a transparent pipe furnace. The temperature variation of these samples was measured using a thermocouple, and a high-speed camera was used to record combus...

Pollutant emissions from combustion systems are a major area of concern with today’s energy needs. Numerical simulations have helped with the design of clean and efficient combustion strategies over the years. However, with the emergence of new fuels and combustion modes, it is necessary to improve the computational models. In this research, improved NOx and soot models are developed which uses...

Background: Microwave Thermotherapy has been gradually used in radiotherapy and it is reported that microwave radiation increases bone demineralization rate independently of temperature. Furthermore, it becomes more and more widespread that the damage caused by the synergistic effect of microwave radiation and hypergravity. The experiment was designed to investigate the effect of microwa...

With the development of science and technology, microwave has been used in many fields such as industry, military, medicine and communication. People are living in a lapped and dynamic electromagnetic environment. Concerns about potential hazards of microwave are getting increasing attentions. The single biological effects of microwave were widely discussed which was considered harmful. Relevan...

The effort of many manufacturers of heat sources is to achieve the maximum efficiency of energy transformation chemically bound in the fuel to heat. Therefore, it is necessary to streamline the combustion process and minimize the formation of emission during combustion. The paper presents an analysis of the combustion air temperature to the heat performance and emission parameters of burning bi...

5.1 ABSTRACT Supersonic combustion data obtained at the low static temperatures appropriate for an efficient scramjet engine are reviewed. Attention is directed at the methods by which the fuel was ignited and combustion maintained. The cited supersonic combustion experiments are grouped under the six headings: chemical intiators; non-uniform flows; turbulent flameholding; combustion induced co...

Combustion and evaporation processes occurring in a closed chamber can result in significant pressure rise and direct work transfer. The pressure and volumetric changes that accompany such processes allow substantial work potential to be achieved in cyclic nonsteady devices, such as internal combustion engines and pulsed combustion or detonation engines. The ideal pressure gain or work producti...