: [email protected] .ac.cn (W. Han). Abstract The unique micro-sized (2–10 mm) Si/C composites consisting of 20 nm carbon coated secondary Si were synthesized from the abundant and low cost Al–Si alloy ingot by acid etching, ball-milling and carbonization procedure. The nano-porous Si/C composites provide a capacity of 1182 mAh g 1 at a current density of 50 mAg , 952 mAh g 1 at 200 mAg , 815 mAh g...

OBJECTIVES Recurrent caries was partly ascribed to lack of antibacterial properties in composite resin. Silver and zinc nanoparticles are considered to be broad-spectrum antibacterial agents. The aim of the present study was to evaluate the antibacterial properties of composite resins containing 1% silver and zinc-oxide nanoparticles on Streptococcus mutans and Lactobacillus. MATERIALS AND ME...

Silicon carbide composites (SiC/SiC) are promising candidate materials for fusion reactors. For the practical application of this class of materials, a design basis for SiC/SiC composites needs to be developed because of inherent brittle-like fracture, i.e., quasi-ductility, which is totally different from ductility of metals. For this purpose, the failure behavior, i.e., matrix cracking behavi...

Background: Polyethylene composites including boron can be used as an effective neutron shield. Our investigation focuses on manufacturing borated polyethylene nano-composite. The purpose of this study is to design a radiation shield for use in both neutron and gamma fields. Materials and Methods: Borated polyethylene shields containing 2%, and 5% weight percentage of Boron nano-particles w...

Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...

The development of high-surface-area carbon electrodes with a defined pore size distribution and the incorporation of pseudo-active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano-onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a...

The combination of high strength and high radiation damage tolerance in nanolaminate composites can be achieved when the individual layers in these composites are only a few nanometers thick and therefore these materials contain a large volume fraction associated with interfaces. These interfaces act both as obstacles to slip, as well as sinks for radiation-induced defects. The morphological an...

The objective of this study was to investigate changes in polymerization stress and elastic modulus for light-cured bulk-fill resin composites following irradiation. Crack analysis was applied to obtain the stresses for 24 h after irradiation, which were calculated from the lengths of cracks in a glass mold bonded to the composites. The elastic modulus was repeatedly measured by nano-indentatio...

To render polymeric materials osteoinductive, nano-sized calcium phosphate apatite particles (CaP) were introduced into a low molecular weight poly(D,L-lactide). Homogenous composites were made with 10%, 20% and 40% by weight of apatite content while pure polylactide was used as control. Thereafter porous samples (pore size 300-400 microm, 60% porosity) were fabricated and sterilized. In vitro ...