Background: In this study, the effect of wastewater produced by pistachio processing in processing terminals on wastewater treatment plants with activated sludge process was investigated. Methods: The pilot of activated sludge was constructed at the laboratory scale similar to wastewater treatment plant in Kerman and it was investigated in different ratios of the wastewater of pistachio proces...

Classical definitions of syntrophy focus on a process, performed through metabolic interaction between dependent microbial partners, such as the degradation of complex organic compounds under anoxic conditions. However, examples from past and current scientific discoveries suggest that a new, simple but wider definition is necessary to cover all aspects of microbial syntrophy. We suggest the te...

After strontium/transuranics removal by precipitation followed by cesium/technetium removal by ion exchange, the remaining low-activity waste in the Hanford River Protection Project Waste Treatment Plant is to be concentrated by evaporation before being mixed with glass formers and vitrified. To provide a technical basis to permit the waste treatment facility, a relatively organic-rich Hanford ...

Spectrophotometric examinations showed the presence of phenolic compounds in the organic residue collected from four groundwater resources located in vicinity of an oil refinery at the outskirt of Tehran. The average concentration of total phenolic compounds was about 0.38 mg.L-1 in these samples using Folin-Ciocalteu method. GC-Mass analysis disclosed that alkylphenols were the major phenolic ...

Platinum group metal (PGM) refining processes produce large quantities of wastewater, which is contaminated with the compounds that make up the solvents/extractants mixtures used in the process. These compounds often include solvesso, beta-hydroxyxime, amines, amides and methyl isobutyl ketone. A process to clean up PGM refinery wastewaters so that they could be re-used in the refining process ...

This thesis describes efforts made on the development of an existing catalytic incinerator. The development work, called process characterization, consists of four general parts. These are the development of measurement methodology, the studying of construction materials, the selection of suitable catalysts and the testing of the effects of process operation conditions. The two application area...

In most cases, the anammox process is used for nitrogen removal from reject water coming from dewatering of digested sludge. However, there are more industrial streams suitable for treatment by partial nitritation/anammox process. The landfill leachate may be a good example of such wastewater. Generally, landfilling is the most used solution for treatment of urban solid wastes. The problem with...

It has been found that tissues fixed for electron microscopy and dehydrated in acetone can be embedded in mixtures of n-butyl methacrylate and polyester resin. Activation with 1 per cent tert-butyl hydroperoxide followed by 12 to 48 hours at 60 degrees C produces blocks that section well with glass knives. The ribbons are cleared of methacrylate by heat (200-250 degrees C for 1 hour) and/or imm...

Coagulation/flocculation (CF) by use of alum and cationic polymer polyDADMAC, was performed as a pretreatment for remediation of oil sands process-affected water (OSPW). Various factors were investigated and the process was optimized to improve efficiency of removal of organic carbon and turbidity. Destabilization of the particles occurred through charge neutralization by adsorption of hydroxid...