This project is intended to build a microstrip low pass filter with a pass band till 3 GHz at 3 dB cutoff frequency. This project is divided into two stages. In the first stage, a conventional seven pole low pass filter using commensurate length 8 / g λ is designed by converting the value of g1 to g7 into unit elements as well as open circuit stubs. In second stage, a method to design low pass ...

In this paper we present a novel technique for OTA-C filter realizations with finite zeros based on doubly loaded passive ladder networks. Only grounded capacitors are needed; all floating capacitors are replaced with active simulations eliminating bottom-plate parasitic capacitors and non-observable poles. Bandpass, highpass and bandstop filters are easily obtained from a lowpass OTA-C prototy...

In this work, a first-order low-pass filter is proposed as suitable for time-mode PWM signal processing. processing, the pulse width of rectangular processing variable. The constructed using basic building blocks such time registers and adders so it characterized by low complexity which can lead to modular versatile design higher-order filters. All were designed verified in TSMC 65 nm technolog...

This paper presents a low-loss, sharp roll-off, and wideband millimeter-wave contiguous diplexer implemented on 0.127 mm-thick TLY5 dielectric material to separate U-band frequency range into two jointed ranges of 40-50 GHz 50-60 using low-pass high-pass filter channels. In order integrate the in front end down-converter evaluate response, proposed is supported by three add-on waveguide-to-susp...

: The input chattering in the sliding mode control (SMC) is alleviated through a low pass filter. When the low pass filter is added to the original system, the overall system including the low pass filter dynamics can not satisfy the matching condition. So the integral SMC is applied for a main controller. A sliding surfaces are designed carefully to make the overall dynamics same with the nomi...

The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...

Filters play an important role in many RF/Microwave applications [1] and are used to select or confine the RF/microwave signals within assigned spectral limits. Emerging applications such as wireless communications continue to challenge RF/microwave filters with ever more stringent requirements like higher performance, smaller size, lighter weight, and lower cost. Microstrip filters are always ...