The ability to classify asphalt surfaces is an important goal for the selection of suitable non-variant targets as pseudo-invariant targets during the calibration/validation of remotely-sensed images. In addition, the possibility to recognize different types of asphalt surfaces on the images can help optimize road network management. This paper presents a multi-resolution study to improve aspha...

The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP), and, more recently, Recycled Asphalt Shingles (RAS) on the performance of asphalt pavement, whil...

To determine the behavior of hot mix asphalt including different penetration grade bitumen has been a major subject of paving engineering. In this study the effects of different penetration grade binders on the mechanical properties of hot mix asphalt were investigated with four different tests. The specimens prepared with AC-5, AC-10, AC-20 and SBS modified AC-10. The stiffness modulus, creep ...

Abstract Designing mixtures of asphalt with a porous structure to gain good trainability decreases both the propagation and generation traffic noise. Porous (PA) use crushed stone, small proportion processing sand, admixtures, binders. Therefore, this study aims examine impact adding crumbed rubber into mix PA. However, optimum amount binder used in reference mixture without crumb (CR) 10, 15, ...

The Indirect Tension Test (IDT) is frequently used for evaluation of asphalt material viscoelastic creep properties. With the increased use of finer aggregate gradations and polymer modified asphalt binders in asphalt materials, crushing can occur under the narrow loading heads. The new specimen configuration proposed has a trimmed area under the loading heads, creating a “flattened-IDT.” This ...

A new composite membrane system, Geo-SealTM, has been developed that offers exceptional chemical resistance for use as a vapor barrier at brownfield sites. Data generated in controlled laboratory conditions indicate the composite membrane to have < 0.2X the volatile organic compound partitioning when compared to spray applied latex/asphalt vapor barriers. More importantly, data generated under ...

an experimental program was conducted to determine the effects of geosynthetic reinforcement on mitigating reflection cracking in asphalt overlays. the objectives of this study were to asses the effects of geosynthetics inclusion and its placement location on the accumulation of permanent deformation. to simulate an asphalt pavement overlaid on top of a crack in a concrete or asphalt pavement, ...

Rutting is one of the most important distresses in asphalt pavements due to its frequency. Rutting or channeling, could be classified in three types: 1) mechanical deformation (rutting in subgrade or base), 2) plastic flow (unstable asphalt layer), and 3) wheel path consolidation. The plastic flow of bituminous mixture depends on many factors; one of this is the type of asphalt used in the mixt...