Headphones and earphones have many extremely small holes or narrow slits; they use sound-absorbing or porous material (i.e., dampers) to suppress vibratory system resonance. The air viscosity in these acoustic paths greatly affects the acoustic properties. Simulation analyses such as the finite element method (FEM) therefore require knowledge of the material properties of sound-absorbing or por...

The success or failure of a material when implanted in the body is greatly determined by the surface properties of the material and the host tissue reactions. The very first event that takes place after implantation is the interaction of soluble ions, molecules and proteins from the biological environment with the material surface leading to the formation of an adsorbed protein layer that will ...

The visible luminescence caused by anodic oxidation of p-type porous silicon has been studied. It is shown that similar luminescence can be observed in n-type material by illumination with near-infrared light. Addition of a suitable reducing agent to the electrolyte solution can both suppress the oxidation of the porous layer and quench its luminescence. These results confirm a previously sugge...

Porous Zn1 - x Mn x O (x = 0.1, 0.2, 0.44) nanosheets were prepared by a low-cost, large-scale production and simple approach, and the applications of these nanosheets as an anode material for Li-ion batteries (LIBs) were explored. Electrochemical measurements showed that the porous Zn0.8Mn0.2O nanosheets still delivered a stable reversible capacity of 210 mA h g(-1) at a current rate of 120 mA...

Phosphoric acid-etching treatment to the hydroxyapatite (HA) surface can modify the solubility calcium structure. The aim of the present study was to develop phosphate treated porous HA, and the characteristic structures and stimulation abilities of bone formation were evaluated to determine its suitability as a new type of bone graft material. Although the phosphoric acid-etching treatment did...

Various CuO nanostructures have been well studied as anode materials for lithium ion batteries (LIBs); however, there are few reports on the synthesis of porous CuO nanostructures used for anode materials, especially one-dimensional (1D) porous CuO. In this work, novel 1D highly porous CuO nanorods with tunable porous size were synthesized in large-quantities by a new, friendly, but very simple...

We present a theoretical approach to study the dielectric properties of porous ceramics and composite materials and explain the experimentally observed notable influence of the coupling between the components of a saturated porous ceramic on the final behavior of the sample. This model is based on the assumption of a dielectric coupling between the components that modifies the expected averaged...

Five types of porous Nickel-Titanium (NiTi) alloy samples of different porosities and pore sizes were fabricated. According to compressive and fracture strengths, three groups of porous NiTi alloy samples underwent further cytocompatibility experiments. Porous NiTi alloys exhibited a lower Young's modulus (2.0 GPa ~ 0.8 GPa). Both compressive strength (108.8 MPa ~ 56.2 MPa) and fracture strengt...

In what follows, we consider a theory for the behaviour of porous solids such that the matrix material is elastic and the interstices are void of material; it is a generalization of the classical theory of elasticity. The theory of porous elastic material has been established by Cowin andNunziato [2, 11]. In this theory, the bulk density is the product of two scalar fields, the matrix material ...