background and purpose: recently, release of pollutants such as pharmaceuticals to the environment becomes one of the most important problems for soil and water. the present study was conducted to introduce walnut shell-based activated carbon (ac) as a new low-cost adsorbent for the removal of cephalexin (cfx) antibiotic from aqueous solutions. materials and methods: this study was conducted in...

toxicity has occurred in workers exposed to nickel dust or nickel carbonyl formed in refining. increased risk of nasal and lung cancers was linked to occupational nickel exposure before current workplace safety standards were set. activated carbon with nano holes used for removing contaminants in environment. the purpose of this work is preparation a new nano-absorber, gz-baki-tac-ni-88, for th...

this paper describes laboratory scale experiments examining the impact of microwave irradiation on the granular activated carbon (gac) exposed to toluene, a common organic vapor frequently released into work environment as well as outdoor. a stream containing 300 ppm toluene was supplied and passed through the granular activated carbon. the saturated adsorbent was placed in a quartz glass react...

phosphoric acid (h3po4) and zinc chloride (zncl2) catalyzed shea nut shells, subjected to a one way activation scheme was employed to study the adsorption kinetics and mode of diffusion of industrial dye uptake. thermodynamics data obtained in this study indicate that the sorption of dye spontaneously increases with time and decreases after equilibration was reached. the adsorption follows the ...

Recent studies have revealed the poisonous nature of aluminum(III) species to aquatic and terrestrial organisms. Therefore, this investigation aims to develop batch adsorption experiments in the laboratory, aiming to the removal of aluminum(III) from aqueous solutions onto powdered activated carbon (PAC). The latter (which is an effective and inexpensive sorbent) was prepared from olive stones ...

As a pretreatment for membrane microfiltration (MF), the use of powdered activated carbon (PAC) with a particle size much smaller than that of conventional PAC (super-powdered PAC, or S-PAC) has been proposed to enhance the removal of dissolved substances. In this paper, another advantage of S-PAC as a pretreatment for MF is described: the use of S-PAC attenuates trans-membrane pressure increas...

Many organic micropollutants present in wastewater, such as pharmaceuticals and pesticides, are poorly removed in conventional wastewater treatment plants (WWTPs). To reduce the release of these substances into the aquatic environment, advanced wastewater treatments are necessary. In this context, two large-scale pilot advanced treatments were tested in parallel over more than one year at the m...

A pure yeast strain Candida tropicalis was immobilized on the matrix of powdered activated carbon, sodium alginate, and polyethylene glycol (PSP beads). The immobilized beads were used as fluidized material in a bioreactor to remove toluene from gaseous stream. Applied toluene loadings were 15.4 and 29.8 g/m(3) h in Step 1 and Step 2, respectively, and toluene removal was found above 95% during...

Activated carbon monoliths (ACMs) were fabricated by H2O activation using powdered fast pyrolytic char (PFPC) as a raw material and bio-oil phenol-formaldehyde (BPF) resin as a binder. The effects of the ratio of BPF resin to PFPC on textural and chemical-surface properties of the ACMs were investigated using elemental analysis, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (...