High density three-dimensional AZO/Al2O3/AZO nanocapacitor arrays have been fabricated for energy storage applications. Using atomic layer deposition technique, the stack of AZO/Al2O3/AZO has been grown in the porous anodic alumina template which is directly formed on the Si substrate. The fabricated capacitor shows a high capacitance density of 15.3 fF/μm2 at 100 kHz, which is nearly 2.5 times...

This paper describes a 8 bits, 20 Msamples/s pipeline analog-to-digital converter implemented in 0.6 μm CMOS technology with a total power dissipation of 75.47 mW. Circuit techniques used include a precise comparator, operational amplifier and clock management. A switched capacitor is used to sample and multiplying at each stage. Simulation a worst case DNL and INL of 0.75 LSB. The design opera...

In this paper, a novel switched-capacitor DC-DC converter with pulse density and width modulation (PDWM) is proposed with reduced output ripple at variable output voltages. While performing pulse density modulation (PDM), the proposed PDWM modulates the pulse width at the same time to reduce the output ripple with high power efficiency. The prototype chip was implemented using 65 nm CMOS proces...

Abstract Single-phase inverters have a wide range of applications in many fields, but there are inherent double frequency problems, and fluctuations can easily cause system instability. This paper proposes mid-point common-mode injection power decoupling circuit. The advantage this topology is that no additional switching devices only the original DC side support capacitors filter H-bridge inve...

Multilevel inverters, including the flying-capacitor topology require more complex control due to the additional flexibility offered by the multiple output voltage levels. One such control method is based on the conventional sinusoidal pulse width modulation (SPWM) scheme and uses multiple triangular carriers. There are a number of SPWM variants that achieve the desired inverter control. This p...

We present the design and analysis of a MEMS variable capacitor coupled to thermal actuators. The variable capacitor is composed by two main components: 1) the capacitor built by two squared plates, which one plate is mechanically fixed to the substrate and the other is a moving plate having mechanical suspensions (springs) connected from each corner of it to the substrate, and 2) a set of ther...

In this paper, battery/ultracapacitor hybrid energy storage system (HESS) is proposed for electric vehicles, it is used to large dc-dc converter by using ultra capacitor and battery. It is also use the dc link for the purpose of maintain the peak voltage value. By the help of battery and ultracapacitor they are operate. The battery is used to charging the capacitor in case of discharge the capa...

We present the design and analysis of a MEMS variable capacitor coupled to thermal actuators. The variable capacitor is composed by two main components: 1) the capacitor built by two squared plates, which one plate is mechanically fixed to the substrate and the other is a moving plate having mechanical suspensions (springs) connected from each corner of it to the substrate, and 2) a set of ther...

This paper presents two novel active-feedback single Miller capacitor frequency compensation techniques for low-power three-stage ampli ̄ers. These techniques include the active-feedback single Miller capacitor frequency compensation (AFSMC) and the dual active-feedback single Miller capacitor frequency compensation (DAFSMC). In the proposed techniques, only one Miller capacitor in series with a...