An isolation enhanced dual polarized microstrip patch antenna has been designed for Sband Synthetic Aperture Radar. This antenna operates at 3.125 GHz with operating bandwidth of 150 MHz or 4.8%. The electromagnetic power is coupled from the feed line to radiating patch through proximity coupling feeding technique for better bandwidth achievement. A centre groundshorted microstrip line is creat...

381 Abstract— A monopole triangular shaped, broadband, compact microstrip patch antenna with shorting pin is presented in this paper. By defecting the ground plane bandwidth of 38.7% with respect to center frequency of a Microstrip patch antenna has been achieved which can be used for WLAN application. 82.4% size reduction has also been achieved by using shorting pin of a microstrip patch anten...

In this paper, the design of a coaxial feed single layer rectangular microstrip patch antenna for IEEE802.11b application is presented. The proposed antenna is designed by using substrate FR4_epoxy having permittivity of about 4.4 and tangent loss of 0.013. The characteristics of the substrate are designed and to evaluate the performance of modeled antenna using HFSS v.11 EM simulator, from Ans...

In this paper we propose a circularly polarized (CP) microstrip antenna on a suspended substrate with a coplanar capacitive feed and a slot within the rectangular patch. The antenna has an axial ratio bandwidth (< 3 dB) of 7.1%. The proposed antenna exhibits a much higher impedance bandwidth of about 49% (S11 < −10 dB) and also yields return loss better than −15 dB in the useful range of circul...

A 2.45-GHz microstrip patch antenna was designed for small-satellite communications. Optimization was achieved by trimming the copper patch to minimize the input return loss over the desired 2:1 VSWR bandwidth. Final testing of the antenna included a successful long-range data transmission over which pictures taken by the satellite were sent to the ground station. In addition to the microstrip ...

Abstract—The design, simulation and fabrication of a left-handed metamaterial (LHM) structure is presented. The combination of the modified square rectangular Split Ring Resonator (SRR) and the Capacitance Loaded Strip (CLS) were used to obtain the negative value of permeability, μ and the negative permittivity, ε. NicolsonRoss-Wier approach was used to identify the double negative region. A go...

Characterization of a tunable & switchable microstrip rectangular patch antenna printed on synthesized LiTi ferrite substrate with a normal magnetic bias field is presented. In this paper the concept of switching and tuning has been described by magnetostatic and spin waves phenomenon. The DC magnetic biasing generate these both type of waves which response a number of novel magnetic and electr...

In this paper, many techniques are suggested and analyses for rectangular microstrip antenna (RMSA) operating in S-band for 3 GHz as center frequency. Using transmission-line model, analysis was done for the behavior of the antenna for different types of substrates, modified patch geometries and shifted feeding point, operating at S-band (2 to 4GHz). This design of RMSA is made to several diele...

A single layer, single feed compact slotted patch antenna is thoroughly simulated in this paper. Resonant f requency has been reduced drastically by cutting three equal slots which are same hexagonal structure at the upper right, upper left and lower left corner from the conventional microstrip patch antenna. It is shown that the simulated results are in acceptable agreement. More importantly, ...

A new design of a wideband dually-polarized shorted microstrip patch antenna coupled to hook shaped probes is presented. The antenna is designed to operate around 4 GHz. The mechanisms of the shorted microstrip patch antenna provide wider impedance bandwidth over 37%. The shorted patch is smaller than as with to the unshorted patch. The present design provides about 40 dB isolation level betwee...