We developed a very low resistivity RPC-type detector, the anode of which was a plate made from materials with resistivity up to 5x107 Ωcm, the cathode being a metallic mesh preceded by a drift region. In such detector it was actually possible to combine the versatility and high counting-rate capability of metallic PPACs with the extreme robustness and "protectiveness" of Resistive Plate Chambe...

Bioimpedance spectroscopy (BIS) is a technique of interest in the study of human pregnancy because it can assess extracellular (ECW), intracellular (ICW), and total body water (TBW) as ECW plus ICW. The technique requires appropriate resistivity coefficients and has not been sufficiently evaluated during the reproductive cycle. Therefore, in a methodological study, we estimated ECW, ICW, and TB...

“Bad metals” are known to have a large linear resistivity at highT that is universally seen near the Mott-Hubbard insulating phase. Less well known is that the thermopower α(T ) of the Mott-Hubbard systems also exhibits simple universal features: (i) close to the insulating phase, where the resistivity has a low-temperature upturn, α(T ) has a pronounced low-T peak that shifts to higher T with ...

AC resistivity measurement results on Mn-Zn sintered ferrite were analyzed in the 0.1-500 MHz range. From electrical point of view, the material could be represented by an equivalent circuit of parallel resistance-capacitance cells connected in series corresponding to the contributions from bulk grains in one hand, and grain boundary layers in the other hand. The experimental resistivity curves...

[1] Quantifying the spatial configuration of hydraulic conductivity (K) in heterogeneous geological environments is essential for accurate predictions of contaminant transport, but is difficult because of the inherent limitations in resolution and coverage associated with traditional hydrological measurements. To address this issue, we consider crosshole and surface‐based electrical resistivity...

The novel discovery of a current-induced transition from insulator to metal in the crystalline phase of Ge2Sb2Te5 and GeSb4Te7 have been studied by means of a model using line-patterned samples. The resistivity of cubic phase Ge-Sb-Te compound was reduced by an electrical current (~1 MA/cm(2)), and the final resistivity was determined based on the stress current density, regardless of the initi...

This paper was selected for presentation by an SPE Program Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum...

Helicopter-borne frequency-domain electromagnetic (HEM) surveys are used extensively for mineral and groundwater exploration and a number of environmental investigations. To have a meaningful interpretation of the measured multi- frequency HEM data, in addition to the resistivity maps which are provided in each frequency or for some particular depth levels, it is a necessity ...