This paper presents a practical methodology for optimization of concentrically braced steel frames subjected to forward directivity near-fault ground motions, based on the concept of uniform deformation theory. This is performed by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In this regard, to ove...

In this paper, Eringen’s nonlocal elasticity and Timoshenko beam theories are implemented to analyze the bending vibration for non-uniform nano-beams.  The governing equations and the boundary conditions are derived using Hamilton’s principle. A Generalized Differential Quadrature Method (GDQM) is utilized for solving the governing equations of non-uniform Timoshenko nano-beam for pinned-pinned...

The effects of nanosecond laser peening on Zr41Ti14Cu12.5Ni10Be22.5 metallic glass were investigated in this study. The peening treatment produced an extra-deep shock-affected zone compared to crystal metal. As opposed to the conventional shear bands, numerous arc shear bands appeared and aggregated in the vertical direction of the laser beam, forming basic units for accommodating plastic defor...

this paper presents a clear monograph on the optimization of thermal instability resistance of the fg (functionally graded) flat structures. for this aim, two fg flat structures, namely an fg beam and an fg circular plate, are considered. these structures are assumed to obey the first-order shear deformation theory, three-parameters power-law distribution of the constituents, and clamped bounda...

We study the plastic deformation of bulk metallic glasses with shear transformation zone (STZ) theory, a physical model for plasticity in amorphous systems, and compare it with experimental data. In STZ theory, plastic deformation occurs when localized regions rearrange due to applied stress and the density of these regions is determined by a dynamically evolving effective disorder temperature....

In this research the sensitivity analysis of the geometric parameters such as: length, thickness and width of a single link flexible manipulator on maximum deflection (MD) of the end effector and vibration energy (VE) of that point are conducted. The equation of motion of the system is developed based on Gibbs-Appel (G-A) formulation. Also for modeling the elastic property of the system the ass...

The piezoelectric properties of bone play an important role in the bone remodeling process and can be employed in clinical bone repair. In this study, the piezo-voltage of bone between two surfaces of a bone beam under bending deformation was measured using an ultra-high-input impedance bioamplifier. The influence of shear stress on the signs of piezo-voltages in bone was determined by comparin...

The formation mechanism of atomic force microscope (AFM) Moir e is explained using the transmittance function. The technique for preparing the AFM Moir e specimen grating is described. The sensitivity and accuracy of this method is analyzed. AFM Moir e method is used to measure the thermal deformation ball grid array (BGA) electronic package. The shear strain at the different solders in the BGA...

In this paper, the static and free vibration analysis of laminated shells is performed by radial basis functions collocation, according to a sinusoidal shear deformation theory (SSDT). The SSDT theory accounts for through-the-thickness deformation, by considering a sinusoidal evolution of all displacements with the thickness coordinate. The equations of motion and the boundary conditions are ob...

The response of moment resisting frame structures to seismic excitation is strongly dependent on the ability of particular structural members to sustain relatively large inelastic deformations without significant degradation of lateral and axial load-carrying capacity. Conventional reinforced concrete frame structures are typically designed according to the strong column/weak beam concept, whic...