in this study, the effect of nanoclay particles content on the physical properties and flammability of composite made of high density polyethylene and wood flour was investigated. for this aim, wood flour was combined with hdpe at 50% by weight, and nanoclay was used in 0, 2, 4 and 6%, also 2% of mape as the coupling agent was used in all formulations. the samples were made in injection molding...

Effects of nano-clay on weight loss of wood-plastic composites (WPC) by five fungi were studied. Nanoclay particles of 20 to 50 nm size were applied at 2, 4, and 6% WPC of 0,90 g/cm3 density. The white-rot fungi Physisporinus vitreus, Pleurotus ostreatus and Trametes versicolor as well as the brown-rot species Antrodia vaillantii and Coniophora puteana were used. Mass loss tests were conducted ...

Common dispersion methods such as ultrasonic sonication, planetary centrifugal mixing and magnetic dispersion have been used extensively to achieve moderate exfoliation of nanoparticles in polymer matrix. In this study, the effect of adding three roll milling to these three dispersion methods for nanoclay dispersion into epoxy matrix was investigated. A combination of each of these mixing metho...

In this paper, the performance of a zinc oxide (ZnO) nanorod-based enzymatic glucose sensor was enhanced with silver (Ag)-doped ZnO (ZnO-Ag) nanorods. The effect of the doped Ag on the surface morphologies, wettability, and electron transfer capability of the ZnO-Ag nanorods, as well as the catalytic character of glucose oxidase (GOx) and the performance of the glucose sensor was investigated. ...

The inherent safety and low cost of aqueous aluminum-air (Al-air) batteries have attracted significant attention. However, their lifespan is constrained due to the formation passive layers severe self-corrosion Al anode. This work addresses anode issues using an innovative design strategy by adding vanadate nanoclay modify interaction electrolyte. results shown that each vanadate, nanoclay, a h...

Nanotechnology can improve the mechanical barrier and antimicrobial (which will not allow invasion of microorganisms in food, increasing food properties, hence be a very promising material for packaging. Nanomaterials keep fresh packaging design. Silver nanoparticles nanoclay represent most nanoempowered available on market others like zinc oxide titanium share little current market. Zinc enhan...

In this paper, intercalation of nanoclay in the miscible polymer blend of poly(vinylidene fluoride) (PVDF) and acrylic rubber(ACM) was studied. X-ray diffraction was used to investigate the formation of nanoscale polymer blend/clay hybrid. Infrared spectroscopy and X-ray analysis revealed the coexistence of β and γ crystalline forms in PVDF/Clay nanocomposite while α crystalline form was found ...

Silver nanowire films are promising alternatives to tin-doped indium oxide (ITO) films as transparent conductive electrodes. In this paper, we report the use of vacuum filtration and a polydimethylsiloxane (PDMS)-assisted transfer printing technique to fabricate silver nanowire films on both rigid and flexible substrates, bringing advantages such as the capability of patterned transfer, the bes...

Titania, single-doped and lanthanum-silver co-doped titania nanocomposite were coated on cellulosic and polyacrylonitrile fibers via sol–gel method. The prepared samples were evaluated using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photolumines...