The adsorption of Cu, Cd, Ni, Zn, and Cr from synthetic solutions on powdered activated carbon (PAC), activated sludge, and dried sludge were investigated under laboratory conditions to assess its ability to remove heavy metals. The adsorption efficiency increased rapidly within the first 30 min and then slowed down as it approached a steady state after 5 h of contact time. The results showed t...

The potential for reuse of iron-rich sludge from waterworks as a replacement for commercial iron salts in wastewater treatment was investigated using acidic and anaerobic dissolution. The acidic dissolution of waterworks sludge both in sulphuric acid and acidic products such as flue gas washing water and commercial iron solution was successful in dissolving the iron from waterworks sludge. The ...

Sludge from kraft mill wastewater treatment was applied on two soils derived from volcanic ashes and, the effect on biological parameters of the soils was evaluated. The soils used in this study were an Andisol belonging of Gorbea Series and an Ultisol belonging of Collipulli Series. The sludge was added at rates of 0, 10, 20, 30 and 50 t ha. Previously, germination of red clover (Trifolium pra...

Sludge production is an avoidable problem arising from the treatment of wastewater. The sludge remained after municipal wastewater treatment contains considerable amounts of various contaminants and if is not properly handled and disposed, it may produce extensive health hazards. Application of aquatic worm is an approach to decrease the amount of biological waste sludge produced in wastewater ...

Denitrifying phosphorus removal is an attractive wastewater treatment process due to its reduced carbon source demand and sludge minimization potential. Two lab-scale sequencing batch reactors (SBRs) were operated in alternating anaerobic-anoxic (A-A) or anaerobic-oxic (A-O) conditions to achieve denitrifying enhanced biological phosphate removal (EBPR) and traditional EBPR. No significant diff...

A single-fibre microfiltration system was employed to investigate the importance of various operating and sludge property parameters to the membrane fouling during sludge filtration. The sludge was obtained from a submerged membrane bioreactor (SMBR). A series of comparative and correlative filtration and fouling tests were conducted on the influence of the operating variables, sludge propertie...

Large amount of sewage sludge is produced in India every day. The sludge is infectious and can spread diseases. It also has essential micro and macro nutrients, especially carbon, useful for soil and crop production. Radiation Technology can be used to hygienise the sludge reliably and affordably and protect health and environment. Addition of useful microorganisms to the hygienised sludge can ...

Anaerobically treated sewage sludge was found to contain extraordinarily high concentrations of 4-nonylphenol, a metabolite derived from nonionic surfactants of the nonylphenol polyethoxylate type. Concentrations in activated sewage sludge, in mixed primary and secondary sludge, and in aerobically stabilized sludge were substantially lower, suggesting that the formation of 4-nonylphenol is favo...

The effects of the molecular weight (MW) and charge density (CD) of cationic polyacrylamide (CPAM) on sludge dewatering and moisture evaporation were investigated in this study. Results indicated that in sludge conditioning, the optimum dosages were 10, 6, 6, 4, and 4 mg g(-1) CPAM with 5 million MW and 20% CD, 5 million MW and 40% CD, 3 million MW and 40% CD, 8 million MW and 40% CD, and 5 mil...

A new process which attains both excess sludge reduction and phosphorus recovery has been developed. In this paper, characteristics of sludge solubilization by ozone were investigated in batch experiments with sludge taken from an A/O reactor supplied with synthetic sewage and several real wastewater treatment plants. Then, performance of the new developed process was investigated in a laborato...