In the present study, effect of receiver position error on optical and thermal performance a parabolic trough collector (PTC) has been studied. Optical analysis PTC carried out by using Monte Carlo ray tracing (MCRT) method. The solar heat flux profile obtained from is coupled with finite volume method (FVM) to study PTC. Simulations have done for experimental SEGS LS2 used in Sandia National L...

Effects of insertion of coiled wire in juxtaposition with twisted tapes on heat transfer rate and solar radiation without disturbing the flow inside the riser tubes in a solar flat plate collector is experimentally reconnoitered in this present work. The wire coil used as a turbulator is placed inside the riser tube while the twisted tape is inserted into the wire coil to create a continuous sw...

Many thermal solar power plants use thermal oil as heat transfer fluid, and molten salts as thermal energy storage. Oil absorbs energy from sun light, and transfers it to a water-steam cycle across heat exchangers, to be converted into electric energy by means of a turbogenerator, or to be stored in a thermal energy storage system so that it can be later transferred to the water-steam cycle. Th...

PHOENICS-2010 has been applied to the simulation of heat transfer within a solar panel design on behalf of the LE2M Laboratory of ICAM, Nantes, France. The panel is assumed to be horizontal and consists of three layers; glass, collector and backboard, with air spaces between. The aim of the panel is to warm air through solar irradiation. The glass and collector gather heat by the "greenhouse ef...

Unglazed transpired collectors or UTC (also known as perforated collectors) are a relatively new development in solar collector technology, introduced in the early nineties for ventilation air heating. These collectors are used in several large buildings in Canada, USA and Europe, effecting considerable savings in energy and heating costs. Transpired collectors are a potential replacement for g...

Abstract The performance stability of the system can be improved by incorporating a solar chimney with phase-change material (PCM). It is recommended that instead using traditional multi-curved trough air collectors for greenhouses, phase change thermal storage wall construction vertical channels employed. Solar utilization rear wall. In order to verify feasibility system, collector test greenh...

The present work evaluates the performance of solar collector using Al2O3-C2H6O2-H2O nanofluid as a working fluid through both experimental and CFD analysis. Ethylene-glycol water mixture (40:60 v/v) is used as base fluid, where α-Al2O3 nanoparticle of 20 nm average size is dispersed for the preparation of nanofluid of four different volumetric concentration (vol. conc.) of 0.05, 0.075, 0.1 and...