LI, CHONG, Ph.D., June 2009, Chemical Engineering Effect of Corrosion Inhibitor on Water Wetting and Carbon Dioxide Corrosion In Oil-Water Two-Phase Flow (198 pp.) Director of Dissertation: Srdjan Nesic The internal corrosion of flowlines and pipelines made from carbon steel is encountered in the oil and gas industry. The corrosion process is primarily associated with the presence of free water...

A model has been developed for calculating the rates of general corrosion of carbon steel and 13%Cr steel in aqueous systems containing carbon dioxide, hydrogen sulfide and other components. The model combines a comprehensive thermodynamic speciation module with electrochemical computations based on the mixed-potential theory. The electrochemical calculations recognize the effects of various pa...

A mechanistic model is developed to predict the general corrosion rate at the top of a gas pipeline. This model covers the three main processes involved in the Top of the Line Corrosion (TLC) phenomena: the dropwise condensation, the behavior of the chemistry in the condensed water and the corrosion at the steel surface. The dropwise condensation process is modeled based on the heat and mass tr...

S. Lasek, E. Mazancová, VŠB-Technical University of Ostrava, FMMI Czech Republic In this paper corrosion properties of X70MnAl28-9 TRIPLEX steel were tested after hot rolling and subsequent aging at 500 °C for 6, 30 and 60 min. and at 600 °C for the same times. For comparison related steels(X100MnAl28-12, X70Mn22, C20) were also used. The microstructure wascharacterized by light microscopy, SEM...

This work is a preliminary examination of mechanistic issues on the comparative corrosion performance of regular epoxy-coated rebar (ECR) and dual polymer-zinc coated reinforcement (DCR) in simulated concrete pore solution with and without chloride ions, at polarizations from +100 mV to -1000 mV in the saturated calomel electrode (SCE) scale and exposure periods of 1 month or longer. Both mater...

The corrosion rate of steel plate using single-factor, multifactor, and complex water systems was investigated via refinery wastewater effluents used as circulating cooling water. The results show that the primary corrosion factors of steel depend on the characteristics of the ions, the formation of the oxidized coating, the diffusion of dissolved oxygen, and other complex factors, although ion...

1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results s...

Organic corrosion inhibitor is one of lower cost technologies that limit the deterioration of concrete structures. The influence of a newly prepared organic corrosion inhibitor on the corrosion behavior of carbon steel in simulated concrete pore solution was investigated by polarization curves, electrochemical impedance spectroscopy, and so on. The effect of organic corrosion inhibitors on conc...

The inhibition effect of N-benzyl-N′-phenyl thiourea (BPTU) on the corrosion of mild steel in 0.01 and 0.05 N HCl medium has been investigated by potentiostatic polarization technique. Results obtained reveal that BPTU is an efficient anodic inhibitor with greater than 94% of efficiency in the range of temperature studied. The adsorption of inhibitor on the mild steel surface obeys the Temkins’...

Arc thermal metal spray coating provides excellent corrosion, erosion and wear resistance to steel substrates. This paper incorporates some results of aluminum coating applied by this method on plain carbon steel. Thereafter, coated panels were exposed to an environment known to form stable corrosion products with aluminum. The coated panels were immersed in Society of Automotive Engineers (SAE...