abstract in this study, the effect of suspended load transport on the characteristics of submerged hydraulic jump (shj) in a rectangular channel was investigated experimentally. sediment concentration and jet froude numbers in the range of 0.424%-16.15% and 1.93-4.96, respectively, were considered. tow grain size 0.15 and 0.03 mm were used in the experiments. characteristics of submerged hydrau...

background: the purpose of this study was to investigate the efficiency of flat sheet membrane bioreactor (fs-mbr) in bod 5 and cod removal of isfahan south municipal wastewater treatment plant. methods: in this study a submerged fs-mbr, with 140 liters volume was fed using microfiltration membrane (mf) during 109 days and hydraulic retention time of 20 hours. findings: the mbr application in m...

for non-darcy flow in submerged porous media a one- dimensional mathematical model has been developed. rockfill detention dams are one of these porous media that comprised of relatively homogenous coarse rockfill which can be used to reduce flood discharge and hydrograph peak. in this research the focus was on the rockfill detention dams in submerged condition. the existence of overtopping rock...

The medium-long term success of osseointegrated dental implants is evaluated on the basis of the degree of osseointegration over time, assessed by radiographic or instrumental analysis (ISQ). Over the years, the question has always been which surgical technique can provide a better performance in the medium-long term and, thanks to literature studies, it has been evidenced that there are no dif...

mo40 low-alloy steels are mostly used to produce industrial components such as crane wheels whichare exposed to abrasive wear. however, during working conditions, their wear resistance is reduced aftera while due to its low hardness. with increasing abrasive wear, the dimensions of components decreaseand they need to be repaired for surface modification. in this regard, hard overlay coatings ar...

flow passing through lateral intakes and channel junctions is turbulent. sediment flow and bed forms areaffected by these flow patterns and vice versa. in this research, a laboratory study was carried out toexplore a possible method for sediment control for a set of submerged vanes and a single spur dikesimultaneously. since a larger portion of the near-bed flow was diverted, the intake receive...

This study focuses on comparing the performance of submerged membrane bioreactor (SMBR) and submerged membrane adsorption bioreactor (SMABR) over a period of 20 days at a hydraulic retention time (HRT) of 3.1h. The effects of PAC on critical flux and membrane fouling were also investigated. The SMABR exhibited better results in terms of mixed liquor suspended solids (MLSS) growth, DOC removal (...

Ferrochrome is the major chromium source for stainless steel production, and submerged-arc furnaces (SAF) are most commonly utilised to smelt chromite ores into ferrochrome by using suitable carbonaceous reductants such as coke. Because of the complexity of feed structure and electrical-thermal-chemical interactions, there exist large gradients and wide distributions of temperature, mineralogy ...

BACKGROUND The aim of this study was to compare histologically the dimensional behavior of peri-implant tissues during osseointegration of immediately exposed or submerged implant placement in fresh extraction and healed sites. METHODS Four fresh extraction and four delayed implant sites were placed in each hemimandible of five dogs at the bone crest level. In 2 implants of each side were ins...

The gas exchange in adult diving beetles (Coleoptera: Dytiscidae) relies on a subelytral air store, which has to be renewed in regular intervals at the water surface. The dive duration varies from a few minutes to 24 h depending on the species, activity, and temperature. However, some species remain submerged for several weeks. Stygobiont species do not ascend to the surface and gas exchange of...