The primary objective of this study was to observe the effect of pellet length on utility and combustion temperature. Pellets with various lengths were combusted in a pellet stove. Pellet length was found to have a significant effect on the combustion temperature and stability. Increasing the length of pellets from 5.8mm to 13.1mm decreased the average burning temperature by 31% and flue gas te...

after harvesting, pistachio nuts are generally kept in storage before being exported. during handling, thenuts are exposed to external forces that cause mechanical damage to them. the increase of the mechanicaldamage is a function of storage conditions, especially temperature. this research investigated the effect ofstorage temperature (25, 5, -5, -15°c), on the mechanical properties of pistach...

The influence of temperature on the growth of the mould Penicillium roqueforti growing on malt extract agar was studied by correlating the produced heat (measured by isothermal calorimetry), ergosterol content (quantified by GC-MS/MS) and biomass of the mould at 10, 15, 20, 25 and 30 degrees C. The results were analysed with a simple metabolic model from which the metabolic efficiency was calcu...

Listeria monocytogenes is a ubiquitous, opportunistic pathogenic organism. Environmental adaptation requires constant regulation of gene expression. Among transcriptional regulators, AgrA is part of an auto-induction system. Temperature is an environmental cue critical for in vivo adaptation. In order to investigate how temperature may affect AgrA-dependent transcription, we compared the transc...

BACKGROUND/PURPOSE The advice that an adequate vitamin D status can be achieved by short, casual exposure to summer sunlight is ubiquitous. This review will examine the value of this advice. METHODS The results of experimental studies on changes in serum 25-hydroxyvitamin D [25(OH)D] concentrations following ultraviolet exposure are interpreted in the context of human exposure to sunlight. ...

We have measured the thermal expansion and the temperature dependence of z and y components of the refractive index for KTiOPO4 and KTiOAsO4, in the wavelength range 532-1585 nm and temperature range 25-200 degrees C, using an interferometric technique. The measurements were used to derive temperature-dependent Sellmeier equations for the two materials. These equations predict with good agreeme...

The effects of acute and developmental temperature on maximum burst swimming speed, body size, and myofibrillar ATPase activity were assessed in tadpoles of the Pacific tree frog, Hyla regilla. Tadpoles from field-collected egg masses were reared in the laboratory at 15 degrees (cool) and 25 degrees C (warm). Body size, maximum burst swimming speed from 5 degrees to 35 degrees C, and tail myofi...

Chemical-mechanical separation of pig slurry into a solid fraction rich in dry matter, P, Cu and Zn and a liquid fraction rich in inorganic N but poor in dry matter may allow farmers to manage surplus slurry by exporting the solid fraction to regions with no nutrient surplus. Pig slurry can be applied to arable land only in certain periods during the year, so it is commonly stored prior to fiel...

We demonstrate measurement and control of nanoscale single-asperity friction by using cantilever probes featuring an in situ solid-state heater in contact with silicon oxide substrates. The heater temperature was varied between 25 and 790 °C. By using a low thermal conductivity sample, silicon oxide, we are able to vary tip temperatures over a broad range from 25 ± 2 to 255 ± 25 °C. In ambient ...

1. The method is described whereby the rate of flow produced by the gills of the oyster can be measured accurately. 2. The rate of doing work in maintaining a constant current along the glass tube can be expressed by the formula W = 2pilmicro S(2), where W = ergs/sec., l = length of the tube, micro = viscosity in poises, and S = speed at the axis of the tube. 3. The relationship between the rat...