deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the finaltempering treatment to enhance the wear resistance and hardness of the steels. in this study, the effects of thedeep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studiedusing the wear testing machine and polarization and impedance...

In this study, the effect of quenching and partitioning (Q&P) heat treatment on structural mechanical properties AISI 4130 steel was investigated. The Q&P process followed at a quench temperature 270 oC three different temperatures 270, 330, 380 oC. phase characterization prepared spicimens were done using X-ray diffractometer (XRD) scanning electron microscopy (SEM), respectively. samples also...

High-strength aluminum alloys, such as the AA7075 alloy, offer great potential for lightweight construction thanks to their high specific strength. However, strength and low ductility are a challenge processing these materials. In our study, three different process routes (T6, W-Temper, O) roll forming of hat profile investigated experimentally in an FE-simulation. Since targeted production is ...

Exploration of the benefit of cryotreatment for achieving improvement in corros ion rate of mild steel is a topic of current research interest. This study is concerned with the effect of deep cryogenic treatment at temperature of -193 0 C on the corrosion rate and mechanical properties. A series of corrosion rate tests have been carried out to cryotreated samples. The specimen were divided into...

the cold roll bonding of al on aisi 304l stainless steel was carried out to fabricate the al/304l/al clad sheet composites. the maximum bond strength of 20 n/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. the microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...

sensitivity of tomato fruits to chilling injury limits its storage and marketability. this study investigated the effect of hot water treatment (hwt) on reducing the consequences of chilling injury (ci) with respect to quality attributes of tomatoes during storage. tomatoes were harvested at three ripening stages: mature green, pink, and red; dipped in hot water at 45°c for 15 min; and stored a...

microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. in this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and zr content. the results show that after homogenization, variations in thickness have no effect on the hardness. also, after hea...

Simulated tempering (ST) is an established Markov chain Monte Carlo (MCMC) method for sampling from a multimodal density π(θ). Typically, ST involves introducing an auxiliary variable k taking values in a finite subset of [0, 1] and indexing a set of tempered distributions, say πk(θ) ∝ π(θ) k. In this case, small values of k encourage better mixing, but samples from π are only obtained when the...