The effect of acetosolv pulping variables viz. pulping time, temperature, catalyst (HCl) and acetic acid on oil palm frond fibres was investigated. The following conditions were found to be optimum to pulp frond fibres: 140 oC, 0.5% HCl, 75% acetic acid, and 1/10 solid/liquor ratio. Under these conditions we could obtain these properties: Kappa number 13-16, zero-span tensile breaking length – ...

Response surface methodology was used to optimize preparation of biocomposites based on poly(lactic acid) and durian peel cellulose. The effects of cellulose loading, mixing temperature, and mixing time on tensile strength and impact strength were investigated. A central composite design was employed to determine the optimum preparation condition of the biocomposites to obtain the highest tensi...

In order to quantitatively characterize the enhancement of hole mobility of strained silicon under different stress intensity conditions, changes of hole effective mass should be studied. In the paper, strained silicon under in-plane biaxially tensile strain based on (0 0 1) substrate and longitudinal uniaxially compressive strain along h1 1 0i are investigated thoroughly. By solving the Hamilt...

The tensile fractures of ultrafine-grained (UFG) Al-Mg alloy with a bimodal grain size were investigated at the microand macroscale using transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with focused ion beam (FIB), and optical microscopy. The nanoscale voids and crack behaviors near the tensile fracture surfaces were revealed in various scale ranges and provi...

Tensile failure properties of single collagen fibrils were determined using our original tensile test method. Fibrils were directly isolated from the fascicles of mouse tail tendons. Both the ends of each fibril were wound onto the tips of two microneedles several times using micromanipulators. The fibril and tips were immersed in physiological saline solution. Then, the fibril was stretched to...

A constitutive model for the stress-strain relationship of single forest root system was developed in order to provide theoretical foundations for the mechanisms of soil-reinforcement by root system and offer a reliable basis for the analysis of root tensile strength character. This study started a general form of linear and non-linear stress-strain relation that was mathematically defined by f...

YU, H. Q., JIANG, Z. H., HSE, C. Y. & SHUPE, T. F. 2008. Selected physical and mechanical properties of moso bamboo (Phyllostachys pubescens). Selected physical and mechanical properties of 4–6 year old moso bamboo (Phyllostachys pubescens) grown in Zhejiang, China were investigated at different vertical and horizontal positions. Two way analysis of variance and Tukey’s mean comparison tests in...

One of the most critical quality attributes of orodispersible films (ODFs) is related to the development of dosage forms with tensile properties suitable for the packaging and patient's handling. Aiming to develop a strategy to reinforce the tensile properties, the current work reported the feasibility to improve the tensile strength of maltodextrins (MDX) based ODFs by adding an amorphous wate...

In the present study, 1.1 volume percent of nano size copper was incorporated into pure tin using hybrid microwave sintering assisted powder metallurgy route. Microwave sintered samples were extruded both at room temperature and at 230 °C. Microstructural characterization studies were conducted on the extruded samples to investigate the distribution characteristics of secondary phase and grain ...

We have developed a novel tensile stage that can be used for in situ electron microscopy examination of the mechanical properties of "superelastic" materials. In our stage, one of the specimen clamps is replaced by a cylindrical roller, which when driven by a motor can easily stretch ("roll on") any specimen irrespective of its plastic properties. We have used the so-called Roll-o-meter in the ...