A method to enhance surface plasmon coupled fluorescence (SPCF) from thin copper films using silver islands as an overlayer is presented. Silver islands were deposited onto copper thin films using a wet chemical technique for up to 60 s, which resulted in surface features ranging from randomly sized silver nanoparticles to a silver thin film. Theoretical Fresnel calculations predict the couplin...

BACKGROUND In this work the chemical structure of dextran-iron oxide thin films was reported. The films were obtained by MAPLE technique from composite targets containing 10 wt. % dextran with 1 and 5 wt.% iron oxide nanoparticles (IONPs). The IONPs were synthesized by co-precipitation method. A KrF* excimer laser source (λ = 248 nm, τFWHM≅25 ns, ν = 10 Hz) was used for the growth of the hybrid...

Previous research on the laser damage resistance of thin films deposited by atomic layer deposition (ALD) is rare. In this work, the ALD process for thin film generation was investigated using different process parameters such as various precursor types and pulse duration. The laser-induced damage threshold (LIDT) was measured as a key property for thin films used as laser system components. Re...

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such met...

Though tungsten trioxide (WO3) in bulk, nanosphere, and thin film samples has been extensively studied, few studies have been dedicated to the crystallographic structure of WO3 thin films. In this work, the evolution from amorphous WO3 thin films to crystalline WO3 thin films is discussed. WO3 thin films were fabricated on silicon substrates (Si/SiO2) by RF reactive magnetron sputtering. Once a...

Dimethylformamide/dimethyl sulfoxide solvent mixtures were used as the CH₃NH₃PbI₃ (MAPbI₃) precursor solvent in a one-step spin coating method to fabricate smooth and hydrophilic crystalline MAPbI₃ thin films on top of hydrophobic carbon-60 (C60) thin film for highly efficient photovoltaics. The structural, optical, and excitonic characteristics of the resultant MAPbI₃ thin films were analyzed ...

Nickel oxide (NiO) semiconductors thin films were prepared by e-beam evaporation technique at different substrate temperatures ranging from room temperature to 400 C on glass substrate. Glancing incident X-ray diffraction depict that with the increases in substrate temperature the preferred orientation changes from (111) to (200) direction. Atomic force microscopy was used to investigate the su...

Galinobisuitite thin films of (Bi2S3)(PbS) were prepared using the chemical bath deposition technique (CBD). Thin films were prepared by a modified chemical deposition process by allowing the triethanolamine (TEA) complex of Bi(3+) and Pb(2+) to react with S(2)- ions, which are released slowly by the dissociation of the thiourea (TU) solution. The films are polycrystalline and the average cryst...

BiFeO3 thin films have drawn much attention due to its potential applications for novel magnetoelectric devices and fundamental physics in magnetoelectric coupling. However, the structural evolution of BiFeO3 films with thickness remains controversial. Here we use an optical second-harmonic generation technique to explore the phase-related symmetry evolution of BiFeO3 thin films with the variat...

This paper describes the results of a study of a few design parameters influencing the performance of sensor arrays constructed from nanostructured thin films and interdigitated microelectrodes (IMEs). The nanostructured thin films on the IME devices were prepared from nonanedithiol (NDT) and mercaptoundecanoic acid (MUA) linked assemblies of 2-nm sized gold nanoparticles. The sensor array data...