An efficient method for dominant point detection is proposed in this paper. The region of support for each point on curve is determined using bending value. The points with local maximum smoothing bending value can be located as the dominant points on the curve. The proposed algorithm needs no input parameter. The experimental results show that the new method is efficient and effective in detec...

Corrosion fatigue (CF) tests were carried out on bulk glassy Zr52.5Cu17.9Al10Ni14.6Ti5 (Vitreloy 105) samples under load-controlled three-point bending conditions with a load ratio of R = 0.1 in 0.01 M Na2SO4 + 0.01 M NaCl electrolyte. During cyclic testing, the bar-shaped specimens were polarized in situ at constant potentials and the current was monitored. Three different anodic potentials wi...

This study investigated the influence of porosity on the flexural property of a nanoporous alumina film. When the porosity of the alumina film increased, both bending strength and modulus declined. The results from the bending test revealed that the setting of the film during the bending test had significant influence on the flexural property. Fracture only occurred when the porous side of the ...

Sandwich beams comprising identical face sheets and a square honeycomb core were manufactured from carbon fiber composite sheets. Analytical expressions were derived for four competing collapse mechanisms of simply supported and clamped sandwich beams in three-point bending: core shear, face microbuckling, face wrinkling, and indentation. Selected geometries of sandwich beams were tested to ill...

using computation software to simulate fracture behaviors of structures can shorten the time to estimate safety of engineering structures and reduce a lot of cost of experiment. However three dimensional numerical simulation for fracture process is a challenging issue, because the convergence and accuracy are not easily obtained and high computational cost is generated. In this paper, three new...

(1) GeoSciences, The University of Edinburgh, Crew Building, Edinburgh, EH9 3JN, UK, [email protected] (2) National Oceanography Centre Southampton, European Way, Southampton, SO14 3ZH, UK, [email protected] (3) Physics and Astronomy, University of Leicester, University Rd, Leicester, LE1 7RH, UK, [email protected] (4) Met Office, Fitzroy Rd, Exeter, EX1 3PB, UK, [email protected]...

In this article, the 3 point bending analysis of a mobile phone using LS-DYNA explicit integration method is discussed. Since there are a large number of contact pairs defined in the FEA model, and the FEA model is very large in a 3 point bending analysis of a phone, it is much more convenient to use the explicit method than the implicit method. However, using explicit procedure to a quasi-stat...

Chemical vapor transport (CVT) reactions were used to prepare three modular mixed-valent Cu(I)-Cu(II) compounds, (Pb2Cu(2+)9O4)(SeO3)4(Cu(+)Cl(2))Cl5 (1), (PbCu(2+)5O2)(SeO3)2(Cu(+)Cl2)Cl3 (2), and (Pb(x)Cu(2+)(6-x)O2)(SeO3)2(Cu(+)Cl2)K(1-x)Cl(4-x) (x = 0.20) (3). In their crystal structures chains of anion-centered (OCu(2+)4) and (OCu(2+)3Pb) tetrahedra form honeycomb-like double layers with c...