The reactions between nickel and germanium are investigated by the incorporation of a titanium interlayer on (100) substrate. Under microwave annealing (MWA), germanide layers formed from 150 °C to 350 for 360 s in ambient nitrogen atmosphere. It is found that best quality achieved at °C. becomes cap layer after annealing. Increasing diffusion Ni MWA decreasing Ti ascribed induce uniform format...

In this work, hydroxyapatite/silica nanopowders were granulated to fabricate plasma sprayable feedstocks. For this purpose, the wet powders obtained by heating a hydroxyapatite/silica slurry were stirred and sieved. To realize the feedstock application in the plasma spray process, powders were deposited on titanium substrate. The morphology of granulated feedstock and sprayed coating was ...

Titanium nitride-Copper (TiN-Cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. The influence of Cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. Structural properties of the films were studied by X-ray diffraction pattern. Topography of t...

Monometallic and bimetallic Ni and Co catalytic nanoparticles supported on Titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. These nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (MWCNTs) from acetylene decomposition at 700°C by the catalytic chemical vapor deposition (CCVD) technique. The nanomaterials (catalyst and CNTs) were...

Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...

The purpose of this study was to histologically and mechanically investigate the in vivo bone-bonding ability of anodically oxidized titanium (AO Ti) with an anatase crystal layer on its surface. AO Ti plates, anodically oxidized at 155 V in 1 M H2SO4, were implanted into the proximal metaphyses of mature rabbit tibiae for 4, 8, 16, and 24 weeks and investigated by light microscopy, scanning el...

Thermal plasma spray is a common, well-established technology used in various application fields. Nevertheless, in our work, this technology was employed in a completely new way; for the preparation of bulk titanium. The aim was to produce titanium with properties similar to human bone to be used for bone augmentations. Titanium rods sprayed on a thin substrate wire exerted a porosity of about ...

Molecular adsorption on a sensing surface involves molecule-substrate and molecule-molecule interactions. Combining optical systems and a quartz crystal microbalance (QCM) on the same sensing surface allows the quantification of such interactions and reveals the physicochemical properties of the adsorbed molecules. However, low sensitivity of the current reflection-based techniques compared to ...

In this study, a magnetoelastic resonance microbalance (MERM) was used to directly measure the gas-phase adsorption behavior of water vapor, isopropyl alcohol, and acetone on a sol-gel-derived titanium dioxide sensor coating. The nature of the MERM platform enables chemical measurements in situations in which wires or physical connections are undesired (or not possible) or in which sensor cost ...