. This paper outlines a strategy for the active control of the self-excited vibration of machine tools which arises when metal is turned, ground or milled. The requisite sensor and actuators for successful operation of such a scheme are outlined. Examples of the results of typical sensors are illustrated in a brief review of previous work. A simple single degree of freedom model of chatter is s...

This paper presents the adaptive control scheme with sliding mode compensator for vibration control problem in the presence of disturbance. The dynamic model of the flexible cantilever beam using finite element modeling is derived. The adaptive control with sliding mode compensator using output feedback for output tracking is developed to reject the external disturbance, and to improve the trac...

Using a gas flow simulation tool, the oscillations of the air around the wing are analyzed. It is pointed out that the flow behind and below the wing oscillates with subor low-acoustic frequencies. Such external excitation may enter into resonance with the natural vibration frequencies of the wings and fuselage, which can produce a dangerous effect. The point of the article is that the fuselage...

Based on the issue of torsional vibration, this article analyzes the structure of the drive part of coaxial drive printing system, constructs its mathematic model, and explores the mechanism of generation of torsional vibration of press-that is the coupling of inherent frequency between input signal and machine drive system which leads to torsional vibration. In view of this, it adopts the clos...

Since there are backlash friction and time-varying stiffness, the characteristics of gear pair has strong nonlinearity. When a gear has faults such as pitting, spalling and tooth breakage, there are often some nonlinear characteristics as super-harmonics or sub-harmonics along with vibration signal. These characteristics will cause some difficulty for fault diagnostics, so it is necessary to st...

Abstract: In this paper, we developed an approach for active vibration control of flexible rectangular plate structures using control theory. The flexible rectangular plate system is firstly modelled and simulated via a finite element method; and secondly, a new type of modelling method, and the state-space model are involved in the development of the equation of motion in state-space, which is...

In the present study, fuzzy control of vibration of a hybrid smart composite beam actuated by electro-rheological fluids (ERF) and piezoceramics actuators is investigated. A carbon fiber reinforced plastics (CFRP) cantilevered beam containing ERF with bonded piezoceramics is prepared and vibrated forcibly with sinusoidal external excitation. Fuzzy model of controlled element containing two actu...

The design and control of a steering wheel vibration simulator capable of reproducing a set of desired vibration/acceleration signals is presented. The simulator is to be used in characterizing human perception of vibration as transmitted to the hand through the steering wheel. Accelerometers were used to record the acceleration at the top of the steering wheel in both the up-down (z) and side-...

For free motions, vibration suppression of flexible manipulators has been one of the hottest research topics. However, for constrained motions, a little effort has been devoted for vibration suppression control. Using the dependency of elastic deflections of links on contact force under static conditions, vibrations for constrained planar two-link flexible manipulators have been suppressed succ...

The robust control and active vibration control for free-floating space flexible manipulator with parameter uncertainties are studied. The dynamic equations of the system are developed by using the Lagrangian assumed modes methods, it is verified that the dynamic equation can be linearly dependent on a group of inertial parameters. Based on the results and under the assumption of two-time scale...