The present analysis is focused on free convective heat and mass transfer characteristics of magneto-nanofluid flow through a moving vertical plate in the presence of thermal radiation and thermal diffusion. The water-based nanofluid containing copper is taken into consideration. A uniform magnetic field is applied perpendicular to the plate. The governing equations are solved by applying finit...

In this work, the effect of a variable spatial magnetic field on ferro-nanofluid flow and heat transfer in a double-sided lid-driven enclosure with a sinusoidal hot wall is investigated. The working fluid is a mixture of iron oxide (Fe3O4) nanoparticles and water and is referred to as a ferro-nanofluid. The control volume-based finite element method (CVFEM) is used to solve the governing equati...

In this paper, the effect of the Brownian term in natural convection of CuO-Water nanofluid inside a partially filled porous cavity, with internal heat generation has been studied. It is assumed that the viscosity and thermal conductivity of nanofluid consists of a static part and a Brownian part of which is a function of temperature and the volume fraction of nanofluid. Because of internal hea...

This paper reports a numerical study on the force convection heat transfer and flow characteristics of a nanofluid containing water and Tio2 with various volume fractions (0.002

This paper reports an experimental study on nanofluid convective boiling heat transfer in parallel rectangular minichannels of 800 μm hydraulic diameter. Experiments are conducted with pure water and silver nanoparticles suspended in water base fluid. Two small volume fractions of silver nanoparticles suspended in water are tested: 0.000237% and 0.000475%. The experimental results show that the...

Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...

the objective of the present study is the synthesis of mwcnt-tio2 hybrid nanostructures by solvothermal synthesis method with ticl4 as precursor. the heat transfer enhancement due to the use of mwcnt-tio2 nanofluid was investigated. as-prepared hybrid materials were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). the results showed that mwcnts were uniformly dec...

Heat transfer improvement in circular pipe by using nanofluid and twisted tape is presented in this review paper. Experimental and numerical studies are incorporated involving both the range of turbulent and laminar flow. Effect of type and volume fraction of nanofluid on performance of heat transfer was referred along with the length and twist ratio of the tape through the pipe on heat transfe...

In this numerical study, 4 types of hybrid nanofluid, including Ag-MgO/water, TiO2-Cu/water, Al2O3-CuO/water, and Fe3O4-multi-wall carbon nanotube/water, have been considered potential working fluid in a single U-tube borehole heat exchanger. The selected nanofluid is then analyzed by changing the volume fraction Reynolds number. Based on results, Ag-MgO/water chosen as most favorable carrier f...

Understanding nanofluidic behavior is of fundamental value to the development of many potential nano-technology applications, including high-performance energy absorption. We carry out non-equilibrium molecular dynamics (NEMD) simulations to study the transport characteristics of liquids in a confined nano-environment. It is shown that the distributed electric field arising from either an elect...