Engineering fatigue fracture failure is one of the most common phenomena of mechanical and structural failure, statistically representing approximately 50 to 90% of total mechanical damage [1]. Lattice structures have been widely used in crane booms, steel plants, parking garages, offshore platforms and other fields [2] to [4]. In a crane, the lattice boom has better mechanical properties compa...

Abstract:In this study, an effort has been made to determine the influence of rotational speed of tool on themicrostructure and hardness values of friction stir welded 2024-T851 aluminum alloy. The microstructure of stir zonein the joints has been investigated. It was found that the particles such as Al6(CuFeMn) particles are broken up duringfriction stir welding, and the degree of break up of ...

During the explosive welding, bonding interface of welded materials was fast heated due to high strain rate and drastic plastic deformation. The periodical wave interface, with an amplitude ~300 μm a period wavelength ~800 μm, identifiable as uniform formed in interface. details formation melting zone mixing welding at were observed. Combined Ti-Fe binary phase diagram principle diffusion compo...

In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA) welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT). The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile stre...

As a new treatment process after welding, the process parameters of laser shock peening (LSP) in dynamic strain aging (DSA) temperature regimes can be precisely controlled, and the process is a non-contact one. The effects of LSP at elevated temperatures on the distribution of the surface residual stress of AA6061-T6 welded joints were investigated by using X-ray diffraction technology with the...

In this research work, an attempt has been made to examine the different welding parameters which affect the weldability of 304H Austenitic stainless steel (ASS) welded joint using the proper filler wire. Chemical composition of filler wire was same as that of base metal. Further this study addressed the combined effect of various welding parameters on the metallurgical and mechanical propertie...

In the present study, the microstructure and mechanical properties of the dissimilar welding between ASTM A335 low alloy steel and ER309L austenitic stainless steel were investigated using the gas tungsten arc welding process. The welding of dissimilar materials between ASTM A335 low alloy steel and ER309L austenitic stainless steel was found to have a significant effect on the microstructure w...

Thin gold films placed in contact on compliant elastomeric poly(dimethylsiloxane) supports weld together. This ;;cold welding'' is remarkable both for the low loads required and for the fact that it occurs under ambient laboratory conditions, conditions in which the gold surfaces are covered with films of weakly adsorbed organic impurities. These impurities are probably displaced laterally duri...

D. Bajic, University of Montenegro, Faculty of Mechanical Engineering, G. Vladimirovich Kuzmenko, E.O. Paton Electric Welding Institute, National Academy of Sciences Ukraine, I. Samardžić, J.J.Strossmayer university of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia The paper presents up-to-date achievements in application of a new method of arc welding of various rail profi l...