The weld quality of Tunston inert gas welded joint has been investigated to identify the most economical weld parameters that will bring about optimum properties. Artificial neural network, has been used in the prediction and optimization of the Tunston inert gas weld of mild steel pipes. Neural network model was generated using the Levenberg-Marquardt algorithm with feed ward back propagation ...

As a new treatment process after welding, the process parameters of laser shock peening (LSP) in dynamic strain aging (DSA) temperature regimes can be precisely controlled, and the process is a non-contact one. The effects of LSP at elevated temperatures on the distribution of the surface residual stress of AA6061-T6 welded joints were investigated by using X-ray diffraction technology with the...

An attempt made to optimize the operating parameters involved in an autogenous pulsed Nd: YAG laser welding process of similar and dissimilar combinations of butt joint of 2 mm thick 316 L stainless steel and mild steel. Influence of prominent laser welding parameters such as average peak power, defocus position, spot position, and shielding gas were investigated for welded joints considered. T...

In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA) welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT). The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile stre...

The research aim was to optimize post-weld heat-treatment (PWHT) modes for a laser-welded joint of the Al–Cu–Li alloy and improve their respective strength properties. As result, ultimate tensile strength, yield point, elongation were enhanced up 95%, 94%, 38%, respectively, those inherent in base metal. Before after PWHT, both microstructures phase compositions have been examined by optical sc...

7000 series aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. however, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so friction stir welding (fsw) widely is used for welding this alloys. the process has been demonstrated to be effective and is c...

The widespread application of thermoplastic polymers in different aspects of industries has motivated researchers and companies to improve and upgrade their forming, joining and assembling processes to overcome their limitations. One of the newest joining methods of thermoplastics is friction stir welding which is based on frictional heat generated through contact between a rotating tool and th...

A pathway of post-weld heat treatment (PWHT) to eliminate affected zone (HAZ) softening and improve the strength welded joints DP980 steel was developed. It is found that high temperature isothermal transition at 750–950 °C followed by water-quenching significantly influences fracture location changing microstructures joint. The block martensite distributed discretely in island ferrite after PW...

the relationship between tool wear and process parameter ) of a Metal Matrix Composite (Al 359/SiC/20p). ) are superabrasive materials which consist of ce t a larger metal matrix. Fusion welded MMC joint s in the heat affected zone, disturbances in the particle e to a reduction in weld strength, and the formation 4C3) caused by localized melting. Though these effects ca h careful control of hea...

A novel microwelding procedure to join Si-to-glass using ps-laser pulses with high repetition rates is presented. The procedure provides weld joint with mechanical strength as high as 85 MPa and 45 MPa in sample pairs of Si/aluminosilicate (Si/SW-Y) and Si/borosilicate (Si/Borofloat 33), respectively, which are higher than anodic bonding, at high spatial resolution (< 20 µm) and very high throu...