Tensile properties of bamboo laminae, prepared from bamboo slivers, selected from different regions of bamboo culms (Dendrocalamus strictus), increases from inner to outer region for any cross section and the same is experienced from bottom to top. Application of rule of mixture, on linear regression line drawn from test results, show that fiber strength increases and matrix strength decreases ...

Differing from the hot-pressing method in the manufacturing of traditional wood-rubber composites (WRCs), this study was aimed at fabricating WRCs using rubber processing to improve water resistance and mechanical properties. Three steps were used to make WRCs, namely, fiber-rubber mixing, tabletting, and the vulcanization molding process. Ninety-six WRC panels were made with wood fiber content...

Life-cycle inventory (LCI) data are needed to scientifically document the environmental performance of materials for applications as governed by the many new green building standards, purchasing guidelines, and energy and climate change policy issues. This study develops the LCI data for medium-density fiberboard (MDF), a composite wood panel product comprised of wood fibers, urea– formaldehyde...

Medium density fiberboard (MDF) is an engineered wood product formed by breaking down selected lignin-cellulosic material residuals into fibers, combining it with wax and a resin binder, and then forming panels by applying high temperature and pressure. Because the raw material in the industrial process is ever-changing, the panel industry requires methods for monitoring the composition of thei...

Wood-plastic composites (WPCs) made by selective laser sintering (SLS) approach of 3D printing offer many advantages over single polymer materials, such as low cost, sustainability, and better sintering accuracy. However, WPCs made via SLS are too weak to have widespread applications. In order to increase the mechanical properties of WPCs, a novel type of WPCs containing 0, 0.05, 0.1 and 0.15 w...

ABSTRACf Qualitative and quantitative wood features are reported for 38 species representing 22 genera, including the scandent genera Mendoncia and Thunbergia. Woods of Acanthaceae are characterized by relatively narrow vessels with simple perforation plates and alternate lateral wall pitting, septate libriform fibers, scanty vasicentric axial parenchyma, rays both multiseriate and uniseriate, ...

The interactions with water and the physical properties of microfibrillated celluloses (MFCs) and associated films generated from wood pulps of different yields (containing extractives, lignin, and hemicelluloses) have been investigated. MFCs were produced by combining mechanical refining and a high pressure treatment using a homogenizer. The produced MFCs were characterized by morphology analy...

The process of papermaking requires substantial amounts of energy and wood consumption, which contributes to larger environmental costs. In order to optimize the production of papermaking to suit its many applications in material science and engineering, a quantitative understanding of bonding forces between the individual pulp fibers is of importance. Here we show the first approach to quantif...

Thermoplastic composite materials containing wood fibers are gaining increasing interest in the manufacturing industry. One approach is to use nano- or micro-size cellulosic fibrils as additives and to improve the mechanical properties obtainable with only small fibril loadings by exploiting the high aspect ratio and surface area of nanocellulose. In this study, we used four different wood cell...

Effective utilization of byproducts can affect the profitability of kraft pulping to produce cellulosic fibers from wood. This review considers opportunities to use tall oil components, obtained from kraft pulping, as a source of raw material for biodiesel fuel, or as a source of additives for petrodiesel. Considerable progress has been achieved with respect to converting vegetable oils to dies...