The nanocomposite materials of poly(3,4-ethylenedioxythiophene)/graphene oxide (PEDOT/GO), poly(3,4-ethylenedioxythiophene)/MnO2 (PEDOT/MnO2), and poly(3, 4-ethylenedioxythiophene)/graphene oxide/MnO2 (PEDOT/GO/MnO2) were successfully prepared by facile and template-free solution method. The structure and morphology of nanonanocomposites were characterized by Fourier transform infrared spectros...

The novel carbon (C)/MnO2 double-walled nanotube arrays (DNTAs) are designed and fabricated via template-assisted electrodeposition. The unique DNTA architectures of C/MnO2 composites with high weight fraction of MnO2 allow high electrode utilization ratio and facilitate electron and ion transmission. In the half-cell test, the hybrid C/MnO2 DNTAs as electrodes show a large specific capacitance...

The oxidation of arsenite (As(III)) by manganese oxide is an important reaction in both the natural cycling of As and the development of remediation technology for lowering the concentration of dissolved As(III) in drinking water. This study used both a conventional stirred reaction apparatus and extended X-ray absorption fine structure (EXAFS) spectroscopy to investigate the reactions of As(II...

MnO2/carbon nanotube [CNT] nanocomposites with a CNT core/porous MnO2 sheath hierarchy architecture are synthesized by a simple hydrothermal treatment. X-ray diffraction and Raman spectroscopy analyses reveal that birnessite-type MnO2 is produced through the hydrothermal synthesis. Morphological characterization reveals that three-dimensional hierarchy architecture is built with a highly porous...

We have fabricated a thin film of multilayered MnO2 whose interlayer is occupied with hexadecylpyridinium (HDPy) cations, using a simple anodic approach. The resulting film can effectively sorb iodide anions from aqueous solutions, even in the presence of NaCl or Na2SO4. The maximum sorption capacity was estimated to be 256 mg/g-MnO2, whereas a layered MnO2 film intercalated with K(+) ions show...

MnO2@PPy core-shell micromaterials are prepared by chemical polymerization of pyrrole on the MnO2 surface. The polypyrrole (PPy) is formed as a homogeneous organic shell on the MnO2 surface. The thickness of PPy shell can be adjusted by the usage of pyrrole. The analysis of SEM, FT-IR, X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA), and XRD are used to confirm the for...

Graphene oxide (GO) was deposited on the surface of a MnO2 air cathode by thermal evaporation at 50°C from a GO colloidal suspension. Fourier transformed infrared spectroscopy and field emission scanning electron microscopy confirmed the presence of GO on the MnO2 air cathode (GO-MnO2). Voltammetry and chrono-amperometry showed increased currents for the oxygen reduction reaction (ORR) in 6 M K...

Boron carbide (B4C) added manganese dioxide (MnO2) used as a cathode material for a Zn–MnO2 battery using aqueous lithium hydroxide (LiOH) as the electrolyte is known to have higher discharge capacity but with a lower average discharge voltage than pure MnO2 (additive free). The performance is reversed when using potassium hydroxide (KOH) as the electrolyte. Herein, the MnO2 was mixed with 0, 5...

Conventional crystalline β-MnO2 usually exhibits poor electrochemical activities due to the narrow tunnels in its rutile-type structure. In this study, we synthesized a novel 2D β-MnO2 network with long-range order assembled by β-MnO2 nanowires and demonstrated that the novel 2D β-MnO2 network exhibits enhanced electrochemical performances. The 2D network is interwoven by crossed uniform β-MnO2...