The feasibility of total petroleum hydrocarbon-contaminated (TPH) soil remediation was studied using persulfate oxidation. Factors tested included type of activator, persulfate concentration, number of persulfate applications, and reaction time. Probe chemicals were used to study effi ciency of the persulfate oxidation mechanism. The best activation method used Fe2+, which achieved 40.8% TPH de...

The degradation of 2-chlorophenol (2-CP) by persulfate was investigated. The kinetics of persulfate oxidation of 2-chlorophenol in aqueous solutions at various pH, oxidant concentration, temperature, Fe2+ and Cu2+ ions content was studied. Maximum of 2-CP degradation occurred at pH 8. The oxidation rate of 2-CP increased with increasing the persulfate molar excess. The degradation process was s...

Penicillin G (PG) is one of the most widely consumed antibiotics around the world. Release of PG in environment may lead to contamination of water resources. The aim of the present work is to assess feasibility of applying UV-activated persulfate process in removal of PG from aquatic environments. The study examined the effect of pH (3-11), persulfate initial concentration (0.5-3 mM), reaction ...

This article describes a novel one-step method to prepare cellulose nanocrystals (CNCs) from bleached bagasse pulp via ammonium persulfate (APS) oxidation. The obtained persulfate oxidation cellulose nanocrystals (POCNs) were characterized for their microstructure, crystal properties, and chemical composition. The POCNs were successfully prepared with a total yield of 44.6%. Transmission electr...

1,4-dioxane is an emerging contaminant that was used as a corrosion inhibitor with chlorinated solvents. Metal-activated persulfate can degrade dioxane but reaction kinetics have typically been characterized by a rapid decrease during the first 30 min followed by either a slower decrease or no further change (i.e., plateau). Our objective was to identify the factors responsible for this plateau...

BACKGROUND In this study, a central composite design (CCD) was used for modeling and optimizing the operation parameters such as pH, initial tetracycline and persulfate concentration and reaction time on the tetracycline degradation using sono-activated persulfate process. The effect of temperature, degradation kinetics and mineralization, were also investigated. RESULTS The results from CCD ...

In this paper, a novel gelatin-based hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto gelatin, using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. A proposed mechanism for hydrogel formation was suggested and the structure of the product was established using FTIR spectro...

Chloride and carbonates have the potential to impact pathway, kinetics, and efficiency of oxidation reactions, both as radical scavengers and as metal complexing agents. Traditionally, it is assumed that they have an overall negative impact on the activated persulfate performance. This study investigated the influence of carbonates and chloride on the reactivity of persulfate for three differen...

Poly- and perfluoroalkyl substances (PFASs) have been detected in an increasing number of water supplies. In many instances, the contamination is associated with the use of PFAS-containing aqueous film-forming foams (AFFF) in firefighting activities. To investigate the potential for remediating AFFF contamination in groundwater with heat-activated persulfate, PFAS oxidation and the generation o...