the activated sludge process is the most used biological wastewater treatment method in the world. sludge bulking is one of the most common problems relateing to activated sludge wastewater treatment, and this fact causes poor settling in secondary sedimentation tank. sludge volume index(svi) and the zone settling velocity(zsv) are parameters to quantify the settleability of activated sludge . ...

Ultrawaves sludge sonication technology was trialled at Maroochydore STP from February to June 2013. This was believed to be the first fullscale application of mechanical sludge lysis for enhanced denitrification in Australia. The results of the trial confirmed that sonicated waste activated sludge (WAS) could effectively replace the use of methanol as a carbon source for denitrification, and t...

the effluent quality of a sewage treatment plant using activated sludge process and finally secondary treatment depends on the flocculation efficiency and settling of the flocs. the survey of various treatment processes in water and wastewater treatment shows that temperature and ph are the important factors affecting efficiency of flocculation and settling properties. this study was performed ...

this research was done in order to determine the basic criteria for “tehran oil refinery effluemt treatmentunit” to prove the feasibility of the application of powdered activated carbon in aeration zone of activated sludge system. the main stages of this research included: determination of qualitative and quantitative characteristics of raw wastewater preparation of two pilot scale units of act...

semi-aerobic leachate is characterized by organic matter (cod, bod) which is relatively low in concentration and difficult to biodegrade. in conventional treatment systems, the low biodegradability is attributed to partial stabilization of leachate at the landfill. biological treatment of leachate in malaysia is not well established and any important data for the treatment process is not availa...

 A case study is presented in which two modifications of activated sludge treatment of complex chemical wastewater are experimentally compared: a combination of common activated sludge with powdered activated carbon treatment (PACT), and bioaugmentation of activated sludge treatment (BAST). Industrial wastewater of Pars Oil Refinery that was passed through an oil recovery stage was used to inve...

A bioreactor refers to any manufactured or engineered device that supports a biologically active environment. These kinds of reactors are designed to treat wastewater treatment. Volumetric mass transfer coefficient and the effect of superficial gas velocity, as the most important operational factor on hydrodynamics, in three-phase airlift reactors are investigated in this study. The experiments...

the automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of chassis manufacturing but also, a significant amount of dissolved organics,resulting in high bod or cod loads. suspended solids can be removed from the wastewater by chemical precipitation. h...

The amount of microorganisms in samples activated sludge from
 municipal wastewater treatment unit at “ Ristomya ” south Baghdad
 region, during different seasons was determined. total number of
 greatest the summer (7.6 x 10 5 cells/ml),
 whereas smallest winter
 (1.2 cells/ml).
 representatives genus Pseudomonas predominated in
 quantitative aspect (4.8 cell...