The present study examined the adsorption of silver ion in aqueous solution onto natural clinoptilolite zeolite from Futatsui Mine, Akita Prefecture, Japan. The effects of various parameters, i.e., solution pH, adsorbent dosage, adsorption time, silver ion solution concentration, and temperature, on silver ion adsorption process onto clinoptilolite were examined. Additionally, the thermodynamic...

abstract introduction: dyes are among the most hazardous chemicals in industrial wastesdue to their toxicity for aquaculture, reduction of light permeability, and in turn development of disorders in photosynthesis process. the current study aimed to investigate the efficiency of coral in removing red reactive 198 from textile dye wastewater was investigated. materials & methods: in this experim...

the work focuses on the removing of cu(ii) from aqueous solution by linde f(k) zeolite. the zeolite is synthesized from fly ash by hydrothermal process. the adsorption experiments discuss several factors including the optimal solution ph, zeolite dosage, adsorption temperature, adsorption kinetics and adsorption isotherm equation. the results show that, the optimal solution ph is 6 and the effi...

methoxy polyethylene glycol modified magnetite nanoparticles (pegmns) were synthesized and were characterized by scanning electron microscopy (sem), vibrating sample magnetometer (vsm), and x-ray diffraction (xrd) . the adsorption of diazinon onto (pegmns) was investigated by uv spectrophotometry at 236 nm, through batch experiments. the effects of adsorbent dosage, solution ph, contact time, s...

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

cellulose wastes of a wood and paper factory were used to produce activated carbon. several chemical agents under various conditions were used for production of activated carbon and hence their adsorption properties have been evaluated. in addition the effect of process parameters such as raw material, chemical agent concentration, impregnation ratio, carbonization temperature, carbonization ti...

sorption reactions in many heterogeneous systems are important. adsorption is a time dependent process and knowing the adsorption rate is essential for designing, evaluating and recovering the adsorbents. at the present study, an ammonium adsorption kinetic experiment by some soils series of golestan provice, which is varying in mineralogical and textural properties was conducted using solution...

hydroxyapatite nanocrystals were synthesized by sol-gel combustion method for the sorption ofhg(ii) ions from aqueous solutions. the effects of varying parameters such as ph, temperature, initialmetal concentration, and contact time on the adsorption process were examined. adsorptionequilibrium was established in 360 minutes and the maximum adsorption of hg(ii) on thehydroxyapatite was observed...

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...