By acetylene pyrolysis at 650 and 5508C, carbon nanotubes were synthesized successfully in porous alumina templates anodized in sulfuric and/or oxalic acid solution. For templates anodized in oxalic acid followed by boiling in distilled water, thermal decomposition of acetylene at 6508C in the pores results in the formation of carbon nanofibres. For templates anodized in sulfuric acid, only car...

OBJECTIVES To assess the bonding potential of a universal composite resin cement and an adhesive/composite system to differently pre-treated PEEK surfaces. METHODS One hundred and fifty PEEK disks were embedded in epoxy resin, polished (P4000 grit) and treated as follows (n=30/group): (A) no treatment, (B) acid etching with sulfuric acid (98%) for 1 min, (C) sandblasting for 10s with 50 micro...

Geopolymers are a new promising binder manufactured by activation of a solid aluminosilicate source material with a highly alkaline activating solution and aided by heat. Fly ash, considered to be a waste material is rich in silica and alumina and hence can be used as a source material for manufacture of Geopolymers. These binders have been reported to achieve high early strength and better dur...

A LTHOUGH MANY METHODS have been published for the determination of pregnanediol in urine, we found none of them fully satisfactory. The first gravimetric method (1), and colorimetric methods derived from this one (2, 3), are rather unspecific, because, especially under pathologic conditions, fairly large amounts of similar compounds are found in the so-called pregnanediol fraction. Determinati...

Technologies to collect and reuse sulfuric acid waste is attracting attention to reduce industrial waste in semiconductor manufacturing plants. Reusing sulfuric acid has a high economic value. By using sulfuric acid recycling equipment based on an atmospheric distillation method, we evaluated the recovery percentage of sulfuric acid, the concentration and quality of recycled sulfuric acid, and ...

Sulfuric acid is a common chemical that is widely used in industry and is found in consumer products (e.g., car batteries, cleaning products). In the United States sulfuric acid is ranked number one in terms of production volume. Sulfur trioxide is a precursor to the production of sulfuric acid. Oleum (fuming sulfuric acid) is sulfur trioxide absorbed in concentrated sulfuric acid. Sulfur triox...

0019-1035/$ see front matter Published by Elsevier doi:10.1016/j.icarus.2011.06.008 ⇑ Corresponding author. Fax: +1 301 286 0440. E-mail address: [email protected] (M.J. Loeffl We report laboratory studies on the 0.8 MeV proton irradiation of ices composed of sulfuric acid (H2SO4), sulfuric acid monohydrate (H2SO4 H2O), and sulfuric acid tetrahydrate (H2SO4 4H2O) between 10 and 180 K. Usin...

Previously, we studied the anodization of aluminum by adding alcohol to common acidic electrolytes with a focus on film formation efficiency and hardness anodic oxide film. In this study, difference in carbon number monohydric alcohols select propanol as an additive confirm whether effects behavior growth rate are universal regardless type. The tendency concentration dependence conductivity vis...