Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consi...

the cold roll bonding of al on aisi 304l stainless steel was carried out to fabricate the al/304l/al clad sheet composites. the maximum bond strength of 20 n/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. the microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...

The nature and distribution of residual stresses are invariably critical for fatigue life with dissimilar material joints often inducing high tensile residual stresses. A fatigue-resistant concept of weld cladding process pipelines, producing compressive residual stresses, is under investigation to examine how these stresses may be influenced. Simplified weld cladding simulations have successfu...

CHARACTERIZATION AND CORROSION OF BCC-TANTALUM COATING DEPOSITED ON ALUMINUM AND STEEL SUBSTRATE BY DC MAGNETRON SPUTTERING by Chirag Joshi Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering techniq...

The cold roll bonding of Al on AISI 304L stainless steel was carried out to fabricate the Al/304L/Al clad sheet composites. The maximum bond strength of 20 N/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. The microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...

OBJECTIVE (1) Determine whether tuning fork material (aluminum vs stainless steel) affects Rinne testing in the clinical assessment of conductive hearing loss (CHL). (2) Determine the relative acoustic and mechanical outputs of 512-Hz tuning forks made of aluminum and stainless steel. STUDY DESIGN Prospective, observational. SETTING Outpatient otology clinic. SUBJECTS AND METHODS Fifty su...

Quartz fibers are used in high energy physics experiments as the active medium in high radiation area calorimetry. Quartz fibers are also used in the transmission of optical signals. Even though quartz does not damage by moderate amounts of irradiation, the clad of the fibers and the protective coating (buffer) do damage reducing light transmission. Various types of quartz fibers have been irra...