Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short article describes properties of new additives in water-soluble metal working fluids for aluminum alloy materials. Many half esters or diesters were prepared from the reactions of higher alcohols with acid anhydrides. Interestingly, diesters of PTMG (tetrahydrofuran oligomer, MW = 650 and 1000) and...

There are a number of ways to improve the corrosion and abrasion resistance of metals, including alloying, anodizing, nitriding and application of protective thin films. Alloying involves generating a binary phase diagram to determine the optimum composition and temperature dependence. For example, copper alloys known as “bronzes” offer high strength, abrasion resistance and high temperature co...

Scandium-reinforced aluminum alloys represent a new generation of high-performance alloys that display numerous advantages over high-strength aluminum alloys. Scandium-reinforced alloys are much stronger than other high-strength alloys, exhibit significant grain refinement, strengthen welds, and eliminate hot cracking in welds. These alloys also exhibit a good resistance to corrosion as shown b...

The influence of corrosion on ultrasonic and electromagnetic nondestructive evaluation results has been simulated for 2-layer aluminum aircraft fuselage. Simulations have been performed with respect to ultrasonic time-of-flight measurements aiming on the detection of corrosion at the backwall of the first aluminum layer. Calculations of the eddy current probe response have been performed, where...

The formation of low surface energy hybrid organic-inorganic micro-nanostructured zinc stearate electrodeposit transformed the anodic aluminum oxide (AAO) surface to superhydrophobic, having a water contact angle of 160 ̋. The corrosion current densities of the anodized and aluminum alloy surfaces are found to be 200 and 400 nA/cm2, respectively. In comparison, superhydrophobic anodic aluminum o...

Cyclic voltammetric studies were carried out on the deposition of polyaniline on pure aluminum from oxalic acid solution with and without different anions (CO3, SO3, SO4, DBS) and contribution of these anions to lyaniline film formation was investigated. Corrosion behavior of polyaniline coated aluminum in oxalic acid solution with and without different anions (CO3, SO3, SO4, DBS) has been inve...

In this study, a plasma electrolytic oxidation (PEO) process was used to form titanium-aluminum oxide coating on aluminized steel. The present work was mainly to study the effects of treatment time of PEO process on properties of the titanium coating. A potentiodynamic polarization corrosion test was employed to investigate the corrosion resistance of the coating. The friction coefficient and w...

The corrosion inhibition properties of the benzothiazole BTH and benzotriazole BT inhibitors on the aluminum in 0.25 M HCl solution were studied. Electrochemical impedance spectroscopy EIS, electrochemical noise EN and potentiodynamic polarization techniques were used to investigate the inhibition properties of the inhibitors. Scanning electron microscope SEM was also utilized in order to inves...

Effective protection of power sources from corrosion is critical in the development of abiotic fuel cells, biofuel cells, hybrid cells and biobateries for implantable bioelectronics. Corrosion of these bioelectronic devices result in device inability to generate bioelectricity. In this paper Al/Au/ZnO was considered as a possible anodic substrate for the development of a hybrid cell. The protec...

Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short paper describes properties of new additives for water-soluble cutting fluids for aluminum alloy materials. Some alkyldiphosphonic acids were prepared with known method. Amine salts of these phosphonic acids showed anti-corrosion property for aluminum alloy materials. However, they have no hard wat...