outdoor experiments on a once-through single glazed solar air heater with perforated metal absorber plate were conducted to determine the practical effect of absorber plate porosity as well as suction air flow rate on the collector thermal efficiency and its total pressure drop. three aluminum absorber plates were made perforated by drilling circular holes with different diameter/pitch ratios i...

Abstract Here we study how graphene oxide affects silica aerogels and their physical mechanical properties by examining volume shrinkage, pore volume, surface area compressive strength of these composite aerogels. Composite were made through adding different amount (GO) to sodium silicate precursor using ambient pressure drying method. Additionally, the chemical composition was determined X-ray...

The effects of high pressure (HP) treatment (100-400 MPa at 10-60 °C) on the solubility of milk protein concentrate (MPC) powders were tested. The solubility, measured at 20 °C, of fresh MPC powders made with no HP treatment was 66%. It decreased by 10% when stored for 6 weeks at ambient temperature (~20 °C) and continued to decrease to less than 50% of its initial solubility after 12 months of...

The silica aerogel was prepared by the acid–base sol–gel polymerization of tetraethylorthosilicate precursor followed by ambient pressure drying. The prepared silica aerogels were characterized by Fourier transform infrared )FT-IR(, Thermo-gravimetric and differential thermal analysis )TG/DTA(, X-ray diffractometer )XRD(, Energy dispersive X-ray microanalysis )EDX(, Brunauer–Emmitt–Teller (BET)...

Freeze-dried mouse spermatozoa can be used for normal embryonic development after injection into oocytes, thus indicating that freeze-drying is a useful method for the storage and transportation of genetic materials from animals. We recently reported that storage of freeze-dried mouse spermatozoa requires maintenance at temperatures lower than -80 C for long-term preservation and a pressure of ...

Multiwalled Carbon Nanotube (MWCNT) reinforced silica aerogel was synthesized in a very simple and cost effective sol - gel method. The process was followed by ambient pressure drying, and then the aerogel material was characterized by XRD, BET, SEM, EDX and FT-IR. 2.3 x 10-3 wt% MWCNTs were successfully incorporated in sodium silicate based silica aerogel. This metal-free nanocomposite catalyz...