Thin films of tungsten on piezoelectric substrates La₃Ga₅SiO14 (LGS) and Ca₃TaGa₃Si₂O14 (CTGS) have been investigated as a potential new electrode material for interdigital transducers for surface acoustic wave-based sensor devices operating at high temperatures up to 800 °C under vacuum conditions. Although LGS is considered to be suitable for high-temperature applications, it undergoes chemic...

zno thin films with preferred orientation along the (002) plane were prepared onto the glass substrates by the sol-gel spin coating method for different post- annealing temperatures. the xrd study confirms that the thin films grown by this method have good crystalline hexagonal wurtzite structure. the optical band gap of the samples was determined from uv-visible spectra. it is found that the s...

Effects of post-sintering annealing treatment between 300 and 1000ºC for up to 8 hrs time periods followed by either furnace cooling (FC) or air-cooling (AC) on the hard magnetic properties of some Nd-Fe-B based sintered magnets was investigated. It was shown that the intrinsic coercivity (Hci), second quadrant demagnetization loop shape and thus the energy density (BH)max varied considerably a...

The structural-phase transformations induced by air annealing of SiO x and SiO x  < Er,F > films were studied by the combined use of infrared spectroscopy and ellipsometry. The films were prepared using vacuum evaporation of SiO powder and co-evaporation of SiO and ErF3 powders. The annealing took place at moderate temperatures (750 and 1000 °C). It was found that the micro- and macrostructure ...

Composite titanium carbonitride (TiCN) thin films deposited on AZ31 by DC/RF magnetron sputtering were vacuum annealed at different temperatures. Vacuum annealing yields the following on the structure and properties of the films: the grain grows and the roughness increases with an increase of annealing temperature, the structure changes from polycrystalline to single crystal, and the distributi...

In this study, we report a novel strategy to prepare graphene nanopapers from direct vacuum filtration. Instead of the conventional method, i.e., thermal annealing nanopapers at extremely high temperatures prepared from graphene oxide (GO) or partially reduced GO, we fabricate our graphene nanopapers directly from suspensions of fully reduced graphene oxide (RGO), obtained after RGO and thermal...

The aim of the present work is to study the effect of annealing on the vibration damping capacity of high-chromium (16%) ferromagnetic steel. The alloys were prepared from raw materials of 99.9% purity melted in a high frequency induction furnace under high vacuum. The samples were heat-treated in vacuum at various temperatures (800 to 1200oC) for 1 hour followed by slow cooling (120oC/h). The ...