A practical method to determine the heating and cooling curves of x-ray tube assemblies with rotating anode x-ray tube is proposed. Available procedures to obtain these curves as described in the literature are performed during operation of the equipment, and the precision of the method depends on the knowledge of the total energy applied in the system. In the present work we describe procedure...

Hydrogen production in a microbial electrolysis cell (MEC) can be achieved by either setting the anode potential with a potentiostat, or by adding voltage to the circuit with a power source. In batch tests the largest total gas production (46 3 mL), lowest energy input (2.3 0.3 kWh/m of H2 generated), and best overall energy recovery (sEþS 1⁄4 58 6%) was achieved at a set anode potential of EAn...

Micro-pattern gas detectors, such as the Gas Electron Multiplier (GEM) and the Micromegas need narrow high density anode readout elements to achieve good spatial resolution. A high-density anode readout would require an unmanageable number of electronics channels for certain potential micro-detector applications such as the Time Projection Chamber. We describe below a new technique to achieve g...

Five rigid graphite plates were embedded in evenly divided sections of sediment, ranging from 2 cm (A1) to 10 cm (A5) below the top sediment layer. The maximum power and current of the MFCs increased in depth order; however, despite the increase in the internal resistance, the power and current density of the A5 MFC were 2.2 and 3.5 times higher, respectively, than those of the A1 MFC. In addit...

This paper is concerned with numerical studies of the anode region of a high-intensity argon arc. The anode region is divided into three subzones: the anode boundary layer, the presheath and the sheath. The governing equations of the dominating processes with the boundary conditions taken from the solutions of LTE plasmas are solved by applying the Runge±Kutta procedure. One parameter h, i.e., ...

A low-cost bio-mass-derived carbon substrate has been employed to synthesize MoS₂@carbon composites through a hydrothermal method. Carbon fibers derived from natural cotton provide a three-dimensional and open framework for the uniform growth of MoS₂ nanosheets, thus hierarchically constructing coaxial architecture. The unique structure could synergistically benefit fast Li-ion and electron tra...

Silicon (Si) is under consideration as a potential next-generation anode material for the lithium ion battery (LIB). Experimental reports of up to 40% increase in energy density of Si anode based LIBs (Si-LIBs) have been reported in literature. However, this increase in energy density is achieved when the Si-LIB is allowed to swell (volumetrically expand) more than graphite based LIB (graphite-...

Using FEM during the design of cathodic protection system can optimize the cathodic protection system and forecast the distribution of potential in real marine environment. A single bar was modeled for which protection was provided by an anode located in different places. Through analysis of each unit and synthesis in the whole area, mathematical model of 3-D finite element was constructed. Pot...

In bioelectrochemical systems (BESs), the anode potential can be set to a fixed voltage using a potentiostat, but there is no accepted method for defining an optimal potential. Microbes can theoretically gain more energy by reducing a terminal electron acceptor with a more positive potential, for example oxygen compared to nitrate. Therefore, more positive anode potentials should allow microbes...