The effect of repeated repair welding, shielded with argon, on microstructural properties, corrosion resistance, and dry sliding wear behavior of aluminum alloy 5083/H116 were investigated. Samples were welded by metal inert gas welding method. 100% argon was used to protect fusion zone. Aluminum alloy 5356 was used as the filler metal. The samples for microstructure, corrosion, and wear tests ...

This is the report of a welder who performed argon-shielded electric arc welding in an atmosphere containing trichloroethylene. He developed immediate respiratory symptoms, pulmonary edema 12 hours after exposure, and recurring dyspnea ten days after exposure. These pulmonary reactions might be explained by inhalation of decomposition products of trichloroethylene such as dichloroacetyl chlorid...

This paper gives a recent progress of welding process research in Japan, especially, an instance in the capability of the visualization and prediction of welding arcs, though the dynamic observations of spectral image by a high-speed digital video-camera with a monochromator and also the calculations by numerical models. The dynamic observations lead to visualizations of metal vapor behavior in...

Mechanical alloying (MA) is a solid-state powder processing technique involving repeated cold welding and fracturing of powder particles in a high-energy ball mill. It has been used to obtain nanocrystalline binary system FeNi. Fe and Ni elemental powders have been ball milled in a planetary mill (Pulverisette5, Fritsch) for various times up to several hours. The morphology of the powders was e...

This paper presents a numerical and infrared experimental study of thermal and grain growth behavior during argon tungsten arc welding of 443 stainless steel. A 3D finite element model was proposed to simulate the welding process. The simulations were carried out via the Ansys Parametric Design Language (APDL) available in the finite-element code, ANSYS. To validate the simulation accuracy, a s...

Acetylene is a colorless gas commonly used for welding. It acts mainly as a simple asphyxiant. In this paper, however, we present a patient who developed a severe interstitial pneumonitis after acetylene exposure during aluminum welding. A 44-year old man was welding with acetylene, argon and aluminum electrode sticks in a non-ventilated aluminum tank for 2 h. Four hours after welding dyspnea a...

Comparison of welding influence on structural strength Al-Mg-Si alloy (AW6082-T6), supplied with 10 mm thick sheets, is made. Within the research tension and impact tests joints, made argon-arc friction stir welding, were carried out. During we observed following: plasticity decrease for joint zones, increase weld metal in defects strength.

Inert-gas Arc Welding of Aluminium Aluminium is used widely in metal fabrication processes, chiefly on account of its lightness, the ease with which it may be cast, and its extreme ductility. It is also highly resistant to corrosion, owing to the formation of a protective film of oxide on the surface of the metal. This latter property, however, becomes a disadvantage when it is desired to weld ...

This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...