In the present research work, a low-ash coal, from Ghouzlou deposit in Iran, with an average ash content of 12% was subjected to some beneficiation experiments such as heavy media separation and flotation. Sieve analysis showed that 62.3% of the coal sample with the size of +2 mm had around 7.3% ash contents. Also, heavy media tests carried out on five size fractions revealed that by setting th...

The femur, a rib, and a third metacarpal were collected from 108 barrows (initial weight = 57 kg) and analyzed to determine the effects of porcine somatotropin (pST) and dietary lysine on bone mineralization and mechanical properties. In Exp. 1, pigs were injected daily with 4 mg of pST and fed diets containing 1.0% Ca and .9% P and either .6, .8, 1.0, 1.2, or 1.4% lysine. Control pigs (placebo...

Fly ashes were collected from five power plants under two loads in China. The ashes were heated at four different temperatures, and mercury speciation was determined based on the release regular pattern of mercury with temperature. The mercury concentration, unburned carbon content and mean ash particle sizes were measured. The correlation of mercury capture and unburned carbon content, mean as...

In this paper, the influence of fly ash content on concrete surface chloride concentration was investigated through periodical tests of surface chloride concentration of concrete by immersing three kinds of concrete specimens in 5.0 wt.% sodium chloride solution. One kind of specimen is common concrete without fly ash, whereas the other two kinds of specimens are mixed with fly ash. The results...

Coal is a major source of energy. The available Indian coal quality is very poor having very high ash content and low calorific value. Indian coal generates a large quantity of ash as a by-product of combustion. The objectives of the present study were to reduce the ash content of coal to produce ultra-clean coal. The coal was treated wi...

This paper summarizes attempts to incorporate fl y ash into aluminum castings to decrease the energy content, material content, cost, and weight of selected industrial components, while also improving selected properties. It is shown that fl y ash can be incorporated into an aluminum-alloy matrix using stir casting and pressure infi ltration techniques. The sand and permanent mold castings, whi...

Chloride content is a critical problem for the reuse of incineration bottom ash as raw material in cement. The effect of dechlorination procedure largely depends on the existence form of the chlorides. However, limited information about the distribution and identity of chlorides in bottom ash can be obtained by bulk analysis methods. In this paper, the investigation towards a more comprehensive...

*Correspondence: Soo-Jeong Shin, Department of Wood and Paper Science, Laboratory of Plant Biomass Chemistry, Chungbuk National University, Cheongju, Chungbuk 361-763, South Korea e-mail: [email protected] To investigate the solid raw material characteristics of willow (Salix caprea) bark and woody core, this study analyzed overall chemical composition, monosaccharide composition, ash content...